Review references / Library #2
Review reference evidence
VME-PROD-VehicleMotionManagement - VMMP_ARB_ARBLGLSCA.xlsx · Template · row 42
Needs attention48 unresolved names · 0 evidence issues
One row per unresolved name. Ignoring a name or giving it an anonymous name applies everywhere it appears; a typo correction applies to one source row and must resolve normally.
| Name / issue | Source preview | Decision for this name |
|---|---|---|
OffMissing precondition1 occurrence |
Row 42 · 16642747 · PreviewThe following state descriptions (Off-State, Init-State, Fail-State, NotAvl-State, Avl-State Standby-State, Active-State and Restricted-State) do not need an Else-Path because only one state is set at the same time. If one state is not set, an other state will be set. It is not possible that no state is set. It is also not possible that two or more states are set at the same time.
For example: It can't be defined which state is set, if Avl-State is not set. Therefore a general Else-Path is not useful.
|
|
Init-StateMissing definition1 occurrence |
Row 42 · 16642747 · PreviewThe following state descriptions (Off-State, Init-State, Fail-State, NotAvl-State, Avl-State Standby-State, Active-State and Restricted-State) do not need an Else-Path because only one state is set at the same time. If one state is not set, an other state will be set. It is not possible that no state is set. It is also not possible that two or more states are set at the same time.
For example: It can't be defined which state is set, if Avl-State is not set. Therefore a general Else-Path is not useful.
|
|
Fail-StateMissing definition9 occurrences in 9 rows |
Row 42 · 16642747 · PreviewThe following state descriptions (Off-State, Init-State, Fail-State, NotAvl-State, Avl-State Standby-State, Active-State and Restricted-State) do not need an Else-Path because only one state is set at the same time. If one state is not set, an other state will be set. It is not possible that no state is set. It is also not possible that two or more states are set at the same time.
For example: It can't be defined which state is set, if Avl-State is not set. Therefore a general Else-Path is not useful.
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 32 · 16642740 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 33 · 33429869 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 34 · 16642741 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 35 · 33438716 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 36 · 59475091 · PreviewABAH/WBA/ACA/AEB Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 37 · 16642742 · PreviewDBR Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
NotAvl-StateMissing definition9 occurrences in 9 rows |
Row 42 · 16642747 · PreviewThe following state descriptions (Off-State, Init-State, Fail-State, NotAvl-State, Avl-State Standby-State, Active-State and Restricted-State) do not need an Else-Path because only one state is set at the same time. If one state is not set, an other state will be set. It is not possible that no state is set. It is also not possible that two or more states are set at the same time.
For example: It can't be defined which state is set, if Avl-State is not set. Therefore a general Else-Path is not useful.
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 32 · 16642740 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 33 · 33429869 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 34 · 16642741 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 35 · 33438716 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 36 · 59475091 · PreviewABAH/WBA/ACA/AEB Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 37 · 16642742 · PreviewDBR Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
AvlMissing precondition2 occurrences |
Row 42 · 16642747 · PreviewThe following state descriptions (Off-State, Init-State, Fail-State, NotAvl-State, Avl-State Standby-State, Active-State and Restricted-State) do not need an Else-Path because only one state is set at the same time. If one state is not set, an other state will be set. It is not possible that no state is set. It is also not possible that two or more states are set at the same time.
For example: It can't be defined which state is set, if Avl-State is not set. Therefore a general Else-Path is not useful.
|
|
Standby-StateMissing definition1 occurrence |
Row 42 · 16642747 · PreviewThe following state descriptions (Off-State, Init-State, Fail-State, NotAvl-State, Avl-State Standby-State, Active-State and Restricted-State) do not need an Else-Path because only one state is set at the same time. If one state is not set, an other state will be set. It is not possible that no state is set. It is also not possible that two or more states are set at the same time.
For example: It can't be defined which state is set, if Avl-State is not set. Therefore a general Else-Path is not useful.
|
|
ActiveMissing precondition3 occurrences in 2 rows |
Row 42 · 16642747 · PreviewThe following state descriptions (Off-State, Init-State, Fail-State, NotAvl-State, Avl-State Standby-State, Active-State and Restricted-State) do not need an Else-Path because only one state is set at the same time. If one state is not set, an other state will be set. It is not possible that no state is set. It is also not possible that two or more states are set at the same time.
For example: It can't be defined which state is set, if Avl-State is not set. Therefore a general Else-Path is not useful.
Row 40 · 16642745 · PreviewDetermine acceleration limit for arbitration:
(considering: Activation Prevention)
IF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSE:
Customer Function does not take part in the arbitration
|
|
Restricted-StateMissing definition3 occurrences in 2 rows |
Row 42 · 16642747 · PreviewThe following state descriptions (Off-State, Init-State, Fail-State, NotAvl-State, Avl-State Standby-State, Active-State and Restricted-State) do not need an Else-Path because only one state is set at the same time. If one state is not set, an other state will be set. It is not possible that no state is set. It is also not possible that two or more states are set at the same time.
For example: It can't be defined which state is set, if Avl-State is not set. Therefore a general Else-Path is not useful.
Row 40 · 16642745 · PreviewDetermine acceleration limit for arbitration:
(considering: Activation Prevention)
IF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSE:
Customer Function does not take part in the arbitration
|
|
CustFctIn_LgtLimA_StAcvMissing definition31 occurrences in 11 rows |
Row 27 · 16642736 · PreviewGeneric Input-Interface:
Signals:
CustFctIn_LgtLimA_StAcv (Activation Request of Customer Function)
CustFctIn_LgtLimA_ADmd (Acceleration Demand of Customer Function)
CustFctIn_LgtLimA_ADmdSafeCritFil (Acceleration Demand of Customer Function considering Acceleration Gradient)
CustFctIn_LgtLimA_StTar (TargetState of Customer Function)
Parameters:
CustFctIn_LgtLimA_IdxPrioScnd (Secondary Priority of Customer Function)
CustFctIn_LgtLimA_BitFldConf (Bit0 to Bit6) (LgtLimA Configuration)
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 32 · 16642740 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 33 · 33429869 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 34 · 16642741 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 35 · 33438716 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 36 · 59475091 · PreviewABAH/WBA/ACA/AEB Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 37 · 16642742 · PreviewDBR Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 39 · 16642744 · PreviewEvery customer function without an activation prevention and with an activation request (CustFctIn_LgtLimA_StAcv) takes part in the arbitration.
The customer function with the lowest acceleration demand request (CustFctIn_LgtLimA_ADmdSafeCritFil) wins the arbitration.
If there are more then one customer function with the lowest acceleration demand, the highest priority of the customer function (CustFctIn_LgtLimA_IdxPrioScnd) decides which customer function wins the arbitration.
There is always just one customer function, which can win the arbitration.
Row 40 · 16642745 · PreviewDetermine acceleration limit for arbitration:
(considering: Activation Prevention)
IF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSE:
Customer Function does not take part in the arbitration
|
|
CustFctIn_LgtLimA_ADmdMissing definition1 occurrence |
Row 27 · 16642736 · PreviewGeneric Input-Interface:
Signals:
CustFctIn_LgtLimA_StAcv (Activation Request of Customer Function)
CustFctIn_LgtLimA_ADmd (Acceleration Demand of Customer Function)
CustFctIn_LgtLimA_ADmdSafeCritFil (Acceleration Demand of Customer Function considering Acceleration Gradient)
CustFctIn_LgtLimA_StTar (TargetState of Customer Function)
Parameters:
CustFctIn_LgtLimA_IdxPrioScnd (Secondary Priority of Customer Function)
CustFctIn_LgtLimA_BitFldConf (Bit0 to Bit6) (LgtLimA Configuration)
|
|
CustFctIn_LgtLimA_ADmdSafeCritFilMissing definition4 occurrences in 3 rows |
Row 27 · 16642736 · PreviewGeneric Input-Interface:
Signals:
CustFctIn_LgtLimA_StAcv (Activation Request of Customer Function)
CustFctIn_LgtLimA_ADmd (Acceleration Demand of Customer Function)
CustFctIn_LgtLimA_ADmdSafeCritFil (Acceleration Demand of Customer Function considering Acceleration Gradient)
CustFctIn_LgtLimA_StTar (TargetState of Customer Function)
Parameters:
CustFctIn_LgtLimA_IdxPrioScnd (Secondary Priority of Customer Function)
CustFctIn_LgtLimA_BitFldConf (Bit0 to Bit6) (LgtLimA Configuration)
Row 39 · 16642744 · PreviewEvery customer function without an activation prevention and with an activation request (CustFctIn_LgtLimA_StAcv) takes part in the arbitration.
The customer function with the lowest acceleration demand request (CustFctIn_LgtLimA_ADmdSafeCritFil) wins the arbitration.
If there are more then one customer function with the lowest acceleration demand, the highest priority of the customer function (CustFctIn_LgtLimA_IdxPrioScnd) decides which customer function wins the arbitration.
There is always just one customer function, which can win the arbitration.
Row 40 · 16642745 · PreviewDetermine acceleration limit for arbitration:
(considering: Activation Prevention)
IF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSE:
Customer Function does not take part in the arbitration
|
|
CustFctIn_LgtLimA_StTarMissing definition5 occurrences in 2 rows |
Row 27 · 16642736 · PreviewGeneric Input-Interface:
Signals:
CustFctIn_LgtLimA_StAcv (Activation Request of Customer Function)
CustFctIn_LgtLimA_ADmd (Acceleration Demand of Customer Function)
CustFctIn_LgtLimA_ADmdSafeCritFil (Acceleration Demand of Customer Function considering Acceleration Gradient)
CustFctIn_LgtLimA_StTar (TargetState of Customer Function)
Parameters:
CustFctIn_LgtLimA_IdxPrioScnd (Secondary Priority of Customer Function)
CustFctIn_LgtLimA_BitFldConf (Bit0 to Bit6) (LgtLimA Configuration)
Row 40 · 16642745 · PreviewDetermine acceleration limit for arbitration:
(considering: Activation Prevention)
IF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSE:
Customer Function does not take part in the arbitration
|
|
TargetStateMissing definition1 occurrence |
Row 27 · 16642736 · PreviewGeneric Input-Interface:
Signals:
CustFctIn_LgtLimA_StAcv (Activation Request of Customer Function)
CustFctIn_LgtLimA_ADmd (Acceleration Demand of Customer Function)
CustFctIn_LgtLimA_ADmdSafeCritFil (Acceleration Demand of Customer Function considering Acceleration Gradient)
CustFctIn_LgtLimA_StTar (TargetState of Customer Function)
Parameters:
CustFctIn_LgtLimA_IdxPrioScnd (Secondary Priority of Customer Function)
CustFctIn_LgtLimA_BitFldConf (Bit0 to Bit6) (LgtLimA Configuration)
|
|
CustFctIn_LgtLimA_IdxPrioScndMissing definition3 occurrences in 3 rows |
Row 27 · 16642736 · PreviewGeneric Input-Interface:
Signals:
CustFctIn_LgtLimA_StAcv (Activation Request of Customer Function)
CustFctIn_LgtLimA_ADmd (Acceleration Demand of Customer Function)
CustFctIn_LgtLimA_ADmdSafeCritFil (Acceleration Demand of Customer Function considering Acceleration Gradient)
CustFctIn_LgtLimA_StTar (TargetState of Customer Function)
Parameters:
CustFctIn_LgtLimA_IdxPrioScnd (Secondary Priority of Customer Function)
CustFctIn_LgtLimA_BitFldConf (Bit0 to Bit6) (LgtLimA Configuration)
Row 39 · 16642744 · PreviewEvery customer function without an activation prevention and with an activation request (CustFctIn_LgtLimA_StAcv) takes part in the arbitration.
The customer function with the lowest acceleration demand request (CustFctIn_LgtLimA_ADmdSafeCritFil) wins the arbitration.
If there are more then one customer function with the lowest acceleration demand, the highest priority of the customer function (CustFctIn_LgtLimA_IdxPrioScnd) decides which customer function wins the arbitration.
There is always just one customer function, which can win the arbitration.
Row 41 · 16642746 · PreviewDetermine winner of arbitration:
(this Pre Condition is only relevant for customer functions which take part in the arbitration)
(considering: Determine acceleration limit for arbitration:)
IF [AND(1,2)]:
1) Customer Function takes part in the arbitration
2) Customer Function has the lowest acceleration limit (tolerance 1e-7)
THEN:
Customer Function wins arbitration
ELSEIF [AND(1,2,3)]:
1) Customer Function takes part in the arbitration
2) Customer Function has the lowest acceleration limit togehter with one or more other customer functions (tolerance 1e-7)
3) Customer Function has the highest priority (CustFctIn_LgtLimA_IdxPrioScnd) of all customer functions with the lowest acceleration limit
THEN:
Customer Function wins arbitration
ELSE:
Customer Function loses arbitration
|
|
CustFctIn_LgtLimA_BitFldConfMissing definition1 occurrence |
Row 27 · 16642736 · PreviewGeneric Input-Interface:
Signals:
CustFctIn_LgtLimA_StAcv (Activation Request of Customer Function)
CustFctIn_LgtLimA_ADmd (Acceleration Demand of Customer Function)
CustFctIn_LgtLimA_ADmdSafeCritFil (Acceleration Demand of Customer Function considering Acceleration Gradient)
CustFctIn_LgtLimA_StTar (TargetState of Customer Function)
Parameters:
CustFctIn_LgtLimA_IdxPrioScnd (Secondary Priority of Customer Function)
CustFctIn_LgtLimA_BitFldConf (Bit0 to Bit6) (LgtLimA Configuration)
|
|
LgtLimAMissing definition1 occurrence |
Row 27 · 16642736 · PreviewGeneric Input-Interface:
Signals:
CustFctIn_LgtLimA_StAcv (Activation Request of Customer Function)
CustFctIn_LgtLimA_ADmd (Acceleration Demand of Customer Function)
CustFctIn_LgtLimA_ADmdSafeCritFil (Acceleration Demand of Customer Function considering Acceleration Gradient)
CustFctIn_LgtLimA_StTar (TargetState of Customer Function)
Parameters:
CustFctIn_LgtLimA_IdxPrioScnd (Secondary Priority of Customer Function)
CustFctIn_LgtLimA_BitFldConf (Bit0 to Bit6) (LgtLimA Configuration)
|
|
AEBPRMissing precondition2 occurrences in 2 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
ARAMissing precondition2 occurrences in 2 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
PHMissing precondition2 occurrences in 2 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
PBMissing precondition2 occurrences in 2 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
RCTAMissing precondition2 occurrences in 2 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
CAAMissing precondition2 occurrences in 2 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
Standstill activation preventionMissing definition16 occurrences in 8 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 32 · 16642740 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 33 · 33429869 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 34 · 16642741 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 35 · 33438716 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 36 · 59475091 · PreviewABAH/WBA/ACA/AEB Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 37 · 16642742 · PreviewDBR Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|
|
CustFctOut_LgtLimA_StAcvMissing precondition10 occurrences in 9 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 32 · 16642740 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 33 · 33429869 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 34 · 16642741 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 35 · 33438716 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 36 · 59475091 · PreviewABAH/WBA/ACA/AEB Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 37 · 16642742 · PreviewDBR Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 40 · 16642745 · PreviewDetermine acceleration limit for arbitration:
(considering: Activation Prevention)
IF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses CustFctIn_LgtLimA_ADmdSafeCritFil as acceleration limit
ELSEIF [AND(1,2,3)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarOn
3) activation prevention is false (Customer Function is available)
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSEIF [AND(1,2,3,4)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) CustFctIn_LgtLimA_StTar = VMMP_CRMSA_c_ARB_SrvCtlStTarRstct
3) activation prevention is false (Customer Function is available)
4) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in Active-State OR Restricted-State
THEN:
Customer Function takes part in the arbitration
Customer Function uses VMMP_LOC_c_LimA_ADft as acceleration limit
ELSE:
Customer Function does not take part in the arbitration
|
|
CustFctOut_LgtLimA_FlgNotAvlMissing precondition8 occurrences in 8 rows |
Row 30 · 16642739 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 31 · 33437982 · PreviewAEBPR/ARA/PH/PB/RCTA/CAA Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
VSOEM_s_FlgExcThVLim = true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 32 · 16642740 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 33 · 33429869 · PreviewEA/LIM Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctAcv
2) DSOPRE_s_DrvPed_StKckDwn is true
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 34 · 16642741 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
ASOAF_s_StReqEx is equal to 3
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 35 · 33438716 · PreviewABAH/WBA/ACA Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 36 · 59475091 · PreviewABAH/WBA/ACA/AEB Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) ASOAF_s_StReqEx is equal to 3
2) Fourth vector element of CustFctIn_LgtLimA_StReqESCEx2StTar is equal to 0 (customer function is NOT available in ESC PATA2 Mode)
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) CustFctIn_LgtLimA_StAcv is equal to VMMP_c_StReqCusFctAcv OR VMMP_c_StReqCusFctAcvNeut OR VMMP_c_StReqCusFctAcvStb
2) ASOAF_s_StReqEx changes from VMMP_ASOAF_c_StReqExMd0 to any other value (Falling Edge)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
Row 37 · 16642742 · PreviewDBR Activation Prevention of customer function
(Availability of customer function)
(considering: Determine Customer Function Standstill activation prevention)
IF:
CustFctIn_LgtLimA_StAcv = VMMP_c_StReqCusFctNotAvl
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF [AND(1,2)]:
1) the customer function was in the previous computation cycle (CustFctOut_LgtLimA_StAcv) in NotAvl-State OR Fail-State
2) CustFctIn_LgtLimA_StAcv is NOT equal to VMMP_c_StReqCusFctNoReq
THEN:
activation prevention is true (Customer Function is not available)
ELSEIF:
CustFctOut_LgtLimA_FlgNotAvl = true (Customer Function Standstill activation prevention is true)
THEN:
activation prevention is true (Customer Function is not available)
ELSE:
activation prevention is false (Customer Function is available)
|