Source files

Mapping profiles

Import history

File	Kind	Rows	Checksum
VME-PROD-VehicleMotionManagement - VMMP_ARB_ARBLACSC.xlsx	requirement	96	6c313a49d7cf
VME-PROD-VehicleMotionManagement - VMMP.xlsx	requirement	297	dcdcc7aa02b4

VME-PROD-VehicleMotionManagement - VMMP_SRVPOST_SSHPOST.xlsx · source records


Short description
The module SSHPOST is responsible for extra services which do not belong to any other service of the VMMP.

These are:

* Warning Brake (WarnBrk)

* Hydraulic Brake Assist (HBA)

* Pre Conditioning (PreCdn)

or simple routing operations:

* Brake light suppression requests

 other additional services

* Vehicle Network State Manager

* ESC Activation
Interface description
The valid versions of the signal and parameter files for the relevant SWRS are
Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.parameter
Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.signal
The valid versions of the signals and parameter files can be found in SWRS SWC_VMMP (SWRS ID 1078981) Chapter 2 "Interface description".
The valid version of the signal and parameter files for test basis can be found in CG Checkpoint which to be tested.
Presetting/Framework/Definitions
Traceability
SWRS to Testcase: 

The latest revision of the test specification document is valid for the tracability SWRS to Testcase
SWRS to DOORS: 

DOORS-IDs are mentioned in the SWRS atrribute DOORS IDs.

The latest baseline of the specification document (DOORS) is valid for the traceability SWRS to DOORS.
Toolchain
The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain.
For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used.
Tolerances
The allowed B2B deviation for all output-signals to the expected reactions is defined by the following tolerances:
Bool: No deviation allowed
UInt, Int: No deviation allowed
Float: 0.1% related to the permissible value range of the signal
It must be ensured that an output reaction occurs due to an event at the input within the same calculation step.
Bit numbering
The bit numbering takes place as zero-based numbering method. 

This means, 1 Byte is equal to Bit 0...7.
General Information
In general each of the three services (PreCdn, HydrBrk, WarnBrk) can be used by any customer function. In order to avoid repetitions a generic wording for all customer functions will be used for the input and output signals:

Inputs:

So every service can be called by any customer function by using a service specific request. The asterisks are the placeholders for a customer function:

 CFB***_s_***PreCdn_StReq (Abbrev.: CuFu_PreCdnStReq) 

 CFB***_s_***HydBrkAsi_StThReq (Abbrev.: CuFu_HydBrkStReq) 

 CFB***_s_***WarnBrk_ItReq (Abbrev.: CuFu_WarnBrkStReq) 

The state of a customer function (switched on/off) depends on a corresponding Target State: 

 CRMSA_s_***SSH_StTar (Abbrev.: CuFu_StTar)

each customer function uses only one target state for all used services.

Outputs:

Each customer function gets a specific feedback for the requested service with its corresponding status active feedback signal:

SSHPOST_s_***PreCdn_StAcv (Abbrev.: CuFu_PreCdnStAcv)

SSHPOST_s_***HydBrk_StAcv (Abbrev.: CuFu_HydBrkStAcv) 

SSHPOST_s_***WarnBrk_StAcv (Abbrev.: CuFu_WarnBrkStAcv)
The actual customer functions using specific services are:

Pre Condition: 

ABAH, WBA 

Hydraulic Brake Assist: 

ABAH, WBA 

Warning Brake: 

ABAH, ACA, ACAHFComErr, CAA, EA, RCTA, WBA

Example:

This means e.g. for the hydraulic brake assist ABAH and WBA have to be tested, with the following signals:

Inputs:

Outputs:

Or for the pre conditioning service, ABAH and WBA have to be tested, with the following signals:

Inputs:

Outputs:

For the other customer functions and services the input and output signals are generated in the same way.

Except ACA, ACAHFComErr, CAA, these customer functions don't have a return signal SSHPOST_s_ ***HydBrk_StAcv
The actual customer functions using specific services are:

Pre Condition: 

ABAH, AEB, WBA 

Hydraulic Brake Assist: 

ABAH, WBA 

Warning Brake: 

ABAH, ACA, ACAHFComErr, CAA, EA, RCTA, WBA

Example:

This means e.g. for the hydraulic brake assist ABAH and WBA have to be tested, with the following signals:

Inputs:

Outputs:

Or for the pre conditioning service, ABAH and WBA have to be tested, with the following signals:

Inputs:

Outputs:

For the other customer functions and services the input and output signals are generated in the same way.

Except ACA, ACAHFComErr, CAA, these customer functions don't have a return signal SSHPOST_s_ ***HydBrk_StAcv
General Requirements
The requirements in chapter 4 are only valid if the specific smart service is switched on.

Reversely this means if one of the following parameters is false:

VMMP_SSHPOST_p_WarnBrkSwtOn 

VMMP_SSHPOST_p_HydBrkAsiSwtOn 

VMMP_SSHPOST_p_PreCdnSwtOn

the outputs of the relevant services should always be zero.

See the following requirements:

16647166

16647167

16647168
Warning Brake:

IF[1]:

1) VMMP_SSHPOST_p_WarnBrkSwtOn is false

THEN:

SSHPOST_s_ABAHWarnBrk_StAcv 

SSHPOST_s_EAWarnBrk_StAcv 

SSHPOST_s_RCTAWarnBrk_StAcv 

SSHPOST_s_WBAWarnBrk_StAcv 

SSHPOST_s_WarnBrk_ItReq 

SSHPOST_s_WarnBrk_StResp

should all be zero.
Hydraulic Brake Assist: 

IF[1]:

1) VMMP_SSHPOST_p_HydBrkAsiSwtOn is false

THEN:

SSHPOST_s_ABAHHydBrkAsi_StAcv 

SSHPOST_s_WBAHydBrkAsi_StAcv 

SSHPOST_s_HydBrkAsi_SThReq 

SSHPOST_s_HydBrkAsi_StResp

should all be zero.
Pre Condition: 

IF[1]:

1) VMMP_SSHPOST_p_PreCdnSwtOn is false

THEN:

SSHPOST_s_ABAHPreCdn_StAcv 

SSHPOST_s_WBAPreCdn_StAcv 

SSHPOST_s_PreCdn_StDynDrvBrk 

SSHPOST_s_PreCdn_StResp

should all be zero.
Pre Condition: 

IF[1]:

1) VMMP_SSHPOST_p_PreCdnSwtOn is false

THEN:

SSHPOST_s_ABAHPreCdn_StAcv 

SSHPOST_s_WBAPreCdn_StAcv 

SSHPOST_s_PreCdn_StDynDrvBrk 

SSHPOST_s_PreCdn_StResp 

SSHPOST_s_AEBPreCdn_StAcv

should all be zero.
IF[1]

1) A target state for a customer function switches to off, means:

CRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHStTarOff

THEN[1]

1) all related CuFu response signals CuFu_***StAcv should be zero (Off)

ELSEIF[1]

1) A target state for a customer function switches to failure, means:

CRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHStTarFail

THEN

1) all related CuFu response signals CuFu_***StAcv should be 7 (Failure)

ELSE

1) normal output, see requirements (see chapter 4) are valid.
Requirements
This chapter describes the requirements for the different specific services:

* Pre Conditioning

* Hydraulic Brake Assist

* Warning Brake
Brake Pre Conditioning
IF[AND(1,2,3)]:

1) The Targetstate CRMSA_s_SSH_StTarPreCdn for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOn

2) The Pre Conditioning service is available, meaning ASOAF_s_PreCdn_StAvl is equal to one.

3) There was no request (SSHPOST_s_PreCdn_StDynDrvBrk) in the past, for at least greater double the time of requests since startup.

THEN:

1) the following requirements for Brake Pre Conditioning should be fulfilled.
Request Safety 

IF[1]:

1) the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>=10s

THEN[1,2,3]:

1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should be set to zero

2) SSHPOST_s_PreCdn_StResp = NotAvailable (0)

3) The response signals to all customer functions CuFu_PreCdnStAcv should be NotAvailable (2)
Request Safety, NotAvailable other CuFu

IF[1]:

1) one customer function is requesting in one piece longer than 8 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>8s

THEN[1]:

1) The response signals to the other customer functions, CuFu_PreCdnStAcv, should be NotAvailable (2)
Request Safety, Request of other CuFu

IF AND[1,2]:

1) one customer function is requesting in one piece for 9 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t=9s, and cancels its request at t=9.01s, CuFu_PreCdnStReq == 0.

2) another customer function is requesting at t=9s, meaning CuFu_PreCdnStReq == 1

THEN[1,2,3]:

1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should be set to zero

2) SSHPOST_s_PreCdn_StResp = NotAvailable (0)

3) The response signals to all customer functions CuFu_PreCdnStAcv should be NotAvailable (2)
Request Safety, CoolDown, NotAvailable --> Available

IF [1]:

1)the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>=10s

THEN:

IF [1]:

1) Another customer function tries to request within the next 4s, CuFu_PreCdnStReq == 1 within 10s<t<14s

THEN AND[1,2,3]:

1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should remain zero

2) SSHPOST_s_PreCdn_StResp should remain NotAvailable (0)

3) The response signals to all customer functions CuFu_PreCdnStAcv should remain NotAvailable (2)

ELSEIF[1]:

1) Another customer function tries to request after 14s, CuFu_PreCdnStReq == 1 for t>14s

THEN AND[1,2,3,4]:

1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should change to one

2) SSHPOST_s_PreCdn_StResp should change to NotAvailable (0)

3) The response signal to the requesting customer function CuFu_PreCdnStAcv should be Active (4)

4) The response signals to all non requesting customer functions CuFu_PreCdnStAcv should be NotAvailable (2)
Request: 

IF[1]:

1) only one of the CuFu_PreCdnStReq is requesting (rising edge)

THEN[1,2,3]:

1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should change to Request (1)

2) The response signal SSHPOST_s_PreCdn_StResp should be equal to active (2)

3) The response signal of the requesting customer function CuFu_PreCdnStAcv should change to active (4)

4) The respond signal of the non requesting customer functions CuFu_PreCdnStAcv should be available (1)
No Request: 

IF[1]: 

the function is not in initialisation or failure state and none of the customer functions is requesting Brake Pre Conditioning:

1) All CuFu_PreCdnStReq = 0

THEN[1,2,3]: 

1) The request to the brake system should be SSHPOST_s_PreCdn_StDynDrvBrk = 0

2) SSHPOST_s_PreCdn_StResp should be Ready (1)

3) All status active respond signals, CuFu_PreCdnStAcv, should be Available (1)
Targetstate Fail: 

IF[OR(1,2)]:

1) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff

2) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff in the previous timestep

THEN: 

IF:

1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)

THEN:

1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0

2) SSHPOST_s_PreCdn_StResp should be Failure (7)

3) Each customer status active signal CuFu_PreCdnStAcv should be Failure (7)

ELSEIF:

1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnIni (Init)

THEN:

1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0

2) SSHPOST_s_PreCdn_StResp should be Init (6)

3) Each customer status active signal CuFu_PreCdnStAcv should be Init (6)

ELSEIF:

1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)

THEN:

1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0

2) SSHPOST_s_PreCdn_StResp should be NotAvailable (0)

3) Each customer status active signal CuFu_PreCdnStAcv should be NotAvailable (2)
Hydraulic Brake Assist
IF[AND(1,2)]:

1) The Targetstate CRMSA_s_SSH_StTarHydBrk for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOn

2) The hydraulic brake assist is available, meaning ASOAF_s_HydBrkAsi_StAvl is equal to one.

THEN:

1) the following requirements for Hydraulic Brake Assist should be fulfilled.
No Request: 

IF[1]: 

the function is not in initialisation or failure state and none of the customer functions is requesting a hydraulic brake assist threshold, which means

1) Each CuFu_HydBrkStReq is NoRequest (0)

THEN[1,2,3]: 

1) The request to the brake system should be SSHPOST_s_HydBrkAsi_SThReq = NoReq (0)

2) SSHPOST_s_HydBrkAsi_StResp should be Normal (1)

3) All status active respond signals, CuFu_HydBrkStAcv,should be Available (1)
Request: 

IF[1]:

1) One or more customer functions are requesting a specific threshold

CuFu_HydBrkStReq (1-3)

THEN[1,2,3]:

1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should change to the maximimum of the requested threshold max(CuFu_HydBrkStReq)

2) SSHPOST_s_HydBrkAsi_StResp should change to the maximimum of the requested threshold (max(CuFu_HydBrkStReq) + 1)

3)IF[1]:

1) The request of a customer function CuFuHydBrkAsi_StThReq is equal to

SSHPOST_s_HydBrkAsi_SThReq

THEN[1]: 

1) The respond signal of the requesting customer function CuFu_HydBrkStAcv should change to active (4)

ELSIF[1]: 

1) The request of a customer function CuFuHydBrkAsi_StThReq is greater than zero and smaller than SSHPOST_s_HydBrkAsi_SThReq

THEN[1]: 

1) The respond signal of the requesting customer function CuFu_HydBrkStAcv should change to standby (3)

ELSE[1]:

1) The respond signal of the non requesting customer functions, which means

CuFu_HydBrkStAcv should be available (1)
CuFu Request too long: 

IF[1]:

1) One customer function is requesting a specific threshold

CuFu_HydBrkStReq (1-3) for more than (VMMP_SSHPOST_p_HydBrkCusFctRstCtrLimUppr*VMMP_c_TiSmpl) seconds.

THEN[1,2,3]:

1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should change to zero

2) SSHPOST_s_HydBrkAsi_StResp should change to Available (1)

3) The respond signal of all customer functions, CuFu_HydBrkStAcv, should be available (1)
Actuator State is Not Available: 

IF[AND(1,2)]:

1) Actuator state ASOAF_s_HydBrkAsi_StAvl is NotAvailable (0)

2) Independent of the customer function request threshold, which means CuFu_HydBrkStReq (0-3)

THEN[1,2,3]:

1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should always be zero

2) SSHPOST_s_HydBrkAsi_StResp should change to NotAvailable (0)

3) The respond signal of all customer functions, CuFu_HydBrkStAcv, should be NotAvailable (2)
Targetstate Fail: 

IF[OR(1,2)]:

1) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff

2) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff in the previous timestep

THEN: 

IF:

1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)

THEN:

1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)

2) SSHPOST_s_HydBrkAsi_StResp should be Failure (7)

3) Each customer status active signal CuFu_HydBrkStAcv should be Failure (7)

ELSEIF:

1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnIni (Init)

THEN[1,2,3]:

1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)

2) SSHPOST_s_HydBrkAsi_StResp should be Init (6)

3) Each customer status active signal CuFu_HydBrkStAcv should be Init (6)

ELSEIF:

1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)

THEN[1,2,3]:

1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)

2) SSHPOST_s_HydBrkAsi_StResp should be NotAvailable (0)

3) Each customer status active signal CuFu_HydBrkStAcv should be NotAvailable (2)
Warning Brake
The precondition for the following requirements is, the availability of the braking system and correct customer function requests, which means:

IF AND[1,2,3,4,5]: 

1) The target state conditions for warning brake service is true, CRMSA_s_SSH_StTarWarnBrk is equal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for at least 2 cycles.

2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is equal to VMMP_CRMSA_c_SSH_ASILAStTarOn for at least 2 cycles.

3) At the beginning the availability of the brake system ASOAF_s_WarnBrk_StResp should be set to 1 (Ready)

4) Overdeceleration protection velocity signal VSOEM_s_VDeltaLnBdryASILA should be higher than VMMP_SSHPOST_p_vASILHysSwtOn

5) The target state for each each customer function is on, means:

CRMSA_s___CuFuSSH_StTar is equal to VMMP_CRMSA_c___CuFuSSHStTarOn 

THEN: 

The following requirements should be tested.
Sequence for Warning Brake behavior if one customer function is requesting separately
IF[1]: 

1) Any CuFu is requesting a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)

THEN[1,2,3]: 

1) The output of SSH, SSHPOST_s_WarnBrk_ItReq and SSHPOST_s_WarnBrk_StResp, have to change their values accordingly (1-7).

2) The customer specific feedback signal CuFu_WarnBrkStAcv should then change to 4 (Active).

3) For the other customer functions, which are sending no warning brake request at the moment, their feedback signal CuFu_WarnBrkStAcv should remain at 1 (Available).
After the previous requirement is fulfilled (16647190) the confirmation of the brake system is needed, which means

IF[1]:

1) ASOAF_s_WarnBrk_StResp will be set to 2 (Active).

THEN:

SSHPOST_s_WarnBrk_ItReq should change to 0 (NoRequest)
After the previous requirement is fulfilled (16647191), the real brake system sends a specific recover time which means:

IF[1]: 

1) ASOAF_s_WarnBrk_StResp will be set to 3 (Recover).

THEN:

SSHPOST_s_WarnBrk_ItReq should remain at 0 (NoRequest) but

SSHPOST_s_WarnBrk_StResp should change to 13 (Recover)
After the recover time of the previous requirement (16647192) the brake system is again available, this means:

IF[1]: 

1) value of ASOAF_s_WarnBrk_StResp will be set to 1 (Ready).

THEN:

SSHPOST_s_WarnBrk_StResp should change to 12 (Ready)
Additional requests at the same time step or one after another
The previously mentioned signal behavior is valid if only one customer function is requesting at a time. The two other possibilities are, that one or more customer functions are requesting exactly at the same time or one after another during an active warning brake sequence like described in the previous requirements.

see req.:16647190, 16647191, 16647192, 16647193
If two customer functions are requesting at the same time

then the higher intensity should be fed through with the sequence as described before.
For the case that additional warning brake requests got received during another active request, this requests will be added to a queue.

This queue behavior is described below.
If there is an active request, see req.16647190 for this situation, one ore more additional requests from other customer function can be received (CuFu_WarnBrkStReq between 1-7). For each additional customer warning brake request, the related customer status active CuFu_WarnBrkStAcv, should change to 3 (standby).

After the recover time of the actual active request is over, then the highest intensity value of the queue should be executed with the normal sequence behavior

see req.:16647190, 16647191, 16647192, 16647193
Overdecceleration prevention
IF[AND(1,2]

1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff

2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7)

THEN

SSHPOST_s_WarnBrk_ItReq should change to NoRequest (0)
IF[AND(1,2] 

1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff 

2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) 

THEN 

SSHPOST_s_WarnBrk_StResp should change to NotAvailable (0)
IF[AND(1,2] 

1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff 

2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) 

THEN 

CuFu_WarnBrkStAcv should change to NotAvailable (2)
Targetstate Fail
IF[OR(1,2)]:

1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep.

2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.

THEN: 

IF:

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)

THEN[1]:

1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)

ELSEIF[1]:

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)

THEN[1]:

1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)

ELSEIF[1]:

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)

THEN[1]:

1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)
IF[OR(1,2)]:

1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. 

2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.

THEN: 

IF: 

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)

THEN[2]: 

2) SSHPOST_s_WarnBrk_StResp should be Failure (15)

ELSEIF[1]: 

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)

THEN[2]: 

2) SSHPOST_s_WarnBrk_StResp should be Init (14)

ELSEIF[1]: 

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)

THEN[2]: 

2) SSHPOST_s_WarnBrk_StResp should be NotAvailable (0)
IF[OR(1,2)]: 

1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. 

2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.

THEN: 

IF: 

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)

THEN[3]: 

3) Each customer status active signal CuFu_WarnBrkStAcv should be Failure (7)

ELSEIF[1]: 

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)

THEN[3]: 

3) Each customer status active signal CuFu_WarnBrkStAcv should be Init (6)

ELSEIF[1]: 

1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)

THEN [3]: 

3) Each customer status active signal CuFu_WarnBrkStAcv should be NotAvailable (2)
CuFu Targetstate Fail
IF AND[1,2]:

1) A target state for a customer function switches to off, means:

CRMSA_s___CuFuSSH_StTar is unequal to VMMP_CRMSA_c___CuFuSSHStTarOn

2) This mentioned customer function also requests a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)

THEN AND[1]:

1) This customer function status active signal CuFu_WarnBrkStAcv should be Failure (7)
IF AND[1,2]: 

1) A target state for a customer function switches to off, means: 

CRMSA_s_CuFuSSH_StTar is unequal to VMMP_CRMSA_c_CuFuSSHStTarOn 

2) This mentioned customer function also requests a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)

THEN AND[2]: 

2) This customer functions warning brake request should never lead to a corresponding SSHPOST_s_WarnBrk_ItReq
Special CuFu Degradations
A customer function can have some special degradation reasons. 

For example the rear control traffic alert function should not be available at vehicle velocities > 15km/h
IF:

1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded.

THEN [1]:

1) The RCTA customer function status active signal SSHPOST_s_RCTAWarnBrk_StAcv should be NotAvailable (2)

ELSE [1]:

1) The standard procedure, as described in 16647189, should be executed
IF:

1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded.

THEN [2]:

2) A warning brake request of RCTA, the CFBPCR_s_RCTAWarnBrk_ItReq should not be NoRequest (0) to SSHPOST_s_WarnBrk_ItReq

ELSE [1]:

1) The standard procedure, as described in 16647189, should be executed
Additional Services
Vehicle Network State Manager
The Vehicle Network State Manager (VNSM) is responsible for waking up other ECUs or preventing them to shut down.

Each requesting function could be mapped to each of the three User-IDs.

Therefore each function has three parameters, which decide the routing to the output User-IDs.

Routing

VMMP_SSHPOST_p_flg***SwtOnUsrId1 unequal to one

--> VMM_s_FlgVNSMUsrId1 will be set (1)

VMMP_SSHPOST_p_flg***SwtOnUsrId2 unequal to one

--> VMM_s_FlgVNSMUsrId2 will be set (1)

VMMP_SSHPOST_p_flg***SwtOnUsrId3

--> VMM_s_FlgVNSMUsrId3 will be set (1)
In The following requirements the asterisk will be used for 1,2,3
VNSM Main Switch Off
IF[1]:

1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is zero

THEN:

the output signals VMM_s_FlgVNSMUsrId* should equal zero.
IF[1]:

1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is unequal to zero

THEN:

IF[1]:

1) ARBLGLSCA_s_LgtLimA_FlgWkReq is false

2) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is false

3) ARBPKCSC_s_PrkLckCtl_FlgWkReq is false

4) ARBLLCSC_s_LgtCtl_StAcv is false

5) ARBLLCSC_s_LatCtl_StAcv is false

6) ARBLGLSCA_s_LgtLimA_FlgAcv is false

7) HMSOP_s_StPrkBrkAcv is false

8) HMSOP_s_StPrkPosnAcv is false

9) HMSOP_s_StExtDispTrigEPB is false

10) FSS_s_StEnaReq is false

THEN:

All VMM_s_FlgVNSMUsrId* have to be false

ELSE:

the following requirements should be tested:
VNSM User ID Supervision
SSHPOST supervises each user id with a specific time. This means if there is a continious request, it should not be outputted longer than a specific time.
The signal VMM_s_FlgVNSMUsrId1 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId1*VMMP_c_TiSmpl) seconds
The signal VMM_s_FlgVNSMUsrId2 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId2*VMMP_c_TiSmpl) seconds
The signal VMM_s_FlgVNSMUsrId3 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId3*VMMP_c_TiSmpl) seconds
VNSM User ID Minimum Activation Time
In order to get the wakeup request for different cluster on the wakeup CAN a VNSM event has to held for a certain amount of time.
If an VNSM UserID Event occurs means:

IF:

1) Any output VMM_s_FlgVNSMUsrId* is set to (1)

see (16647230, 16647231, 16647232, 16647236, 16647237, 16647238, 16647240, 16647242, 16647241)

THEN:

1) A VNSM UserID request VMM_s_FlgVNSMUsrId* should be held at least for VMMP_SSHPOST_p_tMinExTiVNSMUsrIds time samples.
VNSM Wakeup Requests
IF[AND(1,2)]: 

1) ARBLGLSCA_s_LgtLimA_FlgWkReq is unequal to zero

THEN: 

depending on the the parameters:

VMMP_SSHPOST_p_flgARBWkLgtLimASwtOnUsrId*

the outputs

VMM_s_FlgVNSMUsrId* should be set (1)
IF[AND(1,2)]: 

1) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is unequal to zero

THEN: 

depending on the the parameters:

VMMP_SSHPOST_p_flgARBWkPrkAlyCtlSwtOnUsrId*

the outputs

VMM_s_FlgVNSMUsrId* should be set (1)
IF[AND(1,2)]: 

1) ARBPKCSC_s_PrkLckCtl_FlgWkReq is unequal to zero

THEN: 

depending on the the parameters:

VMMP_SSHPOST_p_flgARBWkPrkLckCtlSwtOnUsrId*

the outputs

VMM_s_FlgVNSMUsrId* should be set (1)
VNSM Deceleration Interface Wakeup
IF[AND(1,2)]:

1) VMM_s_FlgVNSMUsrId* is set (1) according to OR (16647230, 16647231, 16647232)

2) VMMP_SSHPOST_p_flgSwtOnWkUpStEnaReq is one

THEN: 

SSHPOST_s_TqWhlDece_StEnaReq should be one

ELSE: 

SSHPOST_s_TqWhlDece_StEnaReq should be zero

Row	ID	Type	Status	Relevant	Candidate	Reason	Normalized text
2	16647138.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Short description Short description Raw { "ID": "16647138.0", "ASIL": " ", "Text": "Short description", "Type": "Folder", "Status": "", "Summary": "Short description", "Relevant": "no", "column_12": "", "Foreign ID": "1211310.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
3	16647139.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The module SSHPOST is responsible for extra services which do not belong to any other service of the VMMP. These are: * Warning The module SSHPOST is responsible for extra services which do not belong to any other service of the VMMP. These are: * Warning Brake (WarnBrk) * Hydraulic Brake Assist (HBA) * Pre Conditioning (PreCdn) or simple routing operations: * Brake light suppression requests other additional services * Vehicle Network State Manager * ESC Activation Raw { "ID": "16647139.0", "ASIL": " ", "Text": "The module SSHPOST is responsible for extra services which do not belong to any other service of the VMMP.\n\rThese are:\n\r* Warning Brake (WarnBrk)\n\r* Hydraulic Brake Assist (HBA)\n\r* Pre Conditioning (PreCdn)\n\ror simple routing operations:\n\r* Brake light suppression requests\n\r other additional services\n\r* Vehicle Network State Manager\n\r* ESC Activation", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211311.0", "Description": "The module SSHPOST is responsible for extra services which do not belong to any other service of the VMMP.\n\rThese are:\n\r* Warning Brake (WarnBrk)\n\r* Hydraulic Brake Assist (HBA)\n\r* Pre Conditioning (PreCdn)\n\ror simple routing operations:\n\r* Brake light suppression requests\n\r other additional services\n\r* Vehicle Network State Manager\n\r* ESC Activation", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
4	16647140.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Interface description Interface description Raw { "ID": "16647140.0", "ASIL": " ", "Text": "Interface description", "Type": "Folder", "Status": "", "Summary": "Interface description", "Relevant": "no", "column_12": "", "Foreign ID": "1211308.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
5	16647141.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The valid versions of the signal and parameter files for the relevant SWRS are The valid versions of the signal and parameter files for the relevant SWRS are Raw { "ID": "16647141.0", "ASIL": " ", "Text": "The valid versions of the signal and parameter files for the relevant SWRS are", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211321.0", "Description": "The valid versions of the signal and parameter files for the relevant SWRS are", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
6	16647142.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.parameter Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.parameter Raw { "ID": "16647142.0", "ASIL": " ", "Text": "Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.parameter", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211324.0", "Description": "Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.parameter", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
7	16647143.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.signal Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.signal Raw { "ID": "16647143.0", "ASIL": " ", "Text": "Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.signal", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211325.0", "Description": "Member/SWC_VMMP/01_PROD/30_CG/DevTools/Spec/VMMP/VMMP.signal", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
8	16647144.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The valid versions of the signals and parameter files can be found in SWRS SWC_VMMP (SWRS ID 1078981) Chapter 2 "Interface descrip The valid versions of the signals and parameter files can be found in SWRS SWC_VMMP (SWRS ID 1078981) Chapter 2 "Interface description". Raw { "ID": "16647144.0", "ASIL": " ", "Text": "The valid versions of the signals and parameter files can be found in SWRS SWC_VMMP (SWRS ID 1078981) Chapter 2 \"Interface description\".", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1362554.0", "Description": "The valid versions of the signals and parameter files can be found in SWRS SWC_VMMP (SWRS ID 1078981) Chapter 2 \"Interface description\".", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
9	16647145.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The valid version of the signal and parameter files for test basis can be found in CG Checkpoint which to be tested. The valid version of the signal and parameter files for test basis can be found in CG Checkpoint which to be tested. Raw { "ID": "16647145.0", "ASIL": " ", "Text": "The valid version of the signal and parameter files for test basis can be found in CG Checkpoint which to be tested.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1362556.0", "Description": "The valid version of the signal and parameter files for test basis can be found in CG Checkpoint which to be tested.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
10	16647146.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Presetting/Framework/Definitions Presetting/Framework/Definitions Raw { "ID": "16647146.0", "ASIL": " ", "Text": "Presetting/Framework/Definitions", "Type": "Folder", "Status": "", "Summary": "Presetting/Framework/Definitions", "Relevant": "no", "column_12": "", "Foreign ID": "1211323.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
11	16647147.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Traceability Traceability Raw { "ID": "16647147.0", "ASIL": " ", "Text": "Traceability", "Type": "Folder", "Status": "", "Summary": "Traceability", "Relevant": "no", "column_12": "", "Foreign ID": "1314372.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
12	16647148.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	SWRS to Testcase: The latest revision of the test specification document is valid for the tracability SWRS to Testcase SWRS to Testcase: The latest revision of the test specification document is valid for the tracability SWRS to Testcase Raw { "ID": "16647148.0", "ASIL": " ", "Text": "SWRS to Testcase: \n\rNo InterWiki reference defined in properties for 'integrity'\n\rThe latest revision of the test specification document is valid for the tracability SWRS to Testcase", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1314373.0", "Description": "SWRS to Testcase: \n\rNo InterWiki reference defined in properties for 'integrity'\n\rThe latest revision of the test specification document is valid for the tracability SWRS to Testcase", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
13	16647149.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	SWRS to DOORS: DOORS-IDs are mentioned in the SWRS atrribute DOORS IDs. The latest baseline of the specification document (DOOR SWRS to DOORS: DOORS-IDs are mentioned in the SWRS atrribute DOORS IDs. The latest baseline of the specification document (DOORS) is valid for the traceability SWRS to DOORS. Raw { "ID": "16647149.0", "ASIL": " ", "Text": "SWRS to DOORS: \n\rDOORS-IDs are mentioned in the SWRS atrribute DOORS IDs.\n\r\n\rThe latest baseline of the specification document (DOORS) is valid for the traceability SWRS to DOORS.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1314374.0", "Description": "SWRS to DOORS: \n\rDOORS-IDs are mentioned in the SWRS atrribute DOORS IDs.\n\r\n\rThe latest baseline of the specification document (DOORS) is valid for the traceability SWRS to DOORS.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
14	16647150.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Toolchain Toolchain Raw { "ID": "16647150.0", "ASIL": " ", "Text": "Toolchain", "Type": "Folder", "Status": "", "Summary": "Toolchain", "Relevant": "no", "column_12": "", "Foreign ID": "1211312.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
15	16647151.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain. The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain. Raw { "ID": "16647151.0", "ASIL": " QM", "Text": "The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain.", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211313.0", "Description": "The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
16	16647152.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used. For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used. Raw { "ID": "16647152.0", "ASIL": " QM", "Text": "For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used.", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211315.0", "Description": "For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
17	16647153.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Tolerances Tolerances Raw { "ID": "16647153.0", "ASIL": " ", "Text": "Tolerances", "Type": "Folder", "Status": "", "Summary": "Tolerances", "Relevant": "no", "column_12": "", "Foreign ID": "1211314.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
18	16647154.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	The allowed B2B deviation for all output-signals to the expected reactions is defined by the following tolerances: The allowed B2B deviation for all output-signals to the expected reactions is defined by the following tolerances: Raw { "ID": "16647154.0", "ASIL": " QM", "Text": "The allowed B2B deviation for all output-signals to the expected reactions is defined by the following tolerances:", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211322.0", "Description": "The allowed B2B deviation for all output-signals to the expected reactions is defined by the following tolerances:", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
19	16647155.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	Bool: No deviation allowed Bool: No deviation allowed Raw { "ID": "16647155.0", "ASIL": " QM", "Text": "\n\r \n\r Bool: No deviation allowed", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211318.0", "Description": "\n\r \n\r Bool: No deviation allowed", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
20	16647156.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	UInt, Int: No deviation allowed UInt, Int: No deviation allowed Raw { "ID": "16647156.0", "ASIL": " QM", "Text": "UInt, Int: No deviation allowed", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211316.0", "Description": "UInt, Int: No deviation allowed", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
21	16647157.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	Float: 0.1% related to the permissible value range of the signal Float: 0.1% related to the permissible value range of the signal Raw { "ID": "16647157.0", "ASIL": " QM", "Text": "Float: 0.1% related to the permissible value range of the signal", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211317.0", "Description": "Float: 0.1% related to the permissible value range of the signal", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
22	16647158.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	It must be ensured that an output reaction occurs due to an event at the input within the same calculation step. It must be ensured that an output reaction occurs due to an event at the input within the same calculation step. Raw { "ID": "16647158.0", "ASIL": " QM", "Text": "It must be ensured that an output reaction occurs due to an event at the input within the same calculation step.", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211309.0", "Description": "It must be ensured that an output reaction occurs due to an event at the input within the same calculation step.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
23	16647159.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Bit numbering Bit numbering Raw { "ID": "16647159.0", "ASIL": " ", "Text": "Bit numbering", "Type": "Folder", "Status": "", "Summary": "Bit numbering", "Relevant": "no", "column_12": "", "Foreign ID": "1211319.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
24	16647160.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	The bit numbering takes place as zero-based numbering method. This means, 1 Byte is equal to Bit 0...7. The bit numbering takes place as zero-based numbering method. This means, 1 Byte is equal to Bit 0...7. Raw { "ID": "16647160.0", "ASIL": " QM", "Text": "The bit numbering takes place as zero-based numbering method. \n\rThis means, 1 Byte is equal to Bit 0...7.", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211320.0", "Description": "The bit numbering takes place as zero-based numbering method. \n\rThis means, 1 Byte is equal to Bit 0...7.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
25	16647161.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	General Information General Information Raw { "ID": "16647161.0", "ASIL": " ", "Text": "General Information", "Type": "Folder", "Status": "", "Summary": "General Information", "Relevant": "no", "column_12": "", "Foreign ID": "1113199.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
26	16647162.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	In general each of the three services (PreCdn, HydrBrk, WarnBrk) can be used by any customer function. In order to avoid repetitio In general each of the three services (PreCdn, HydrBrk, WarnBrk) can be used by any customer function. In order to avoid repetitions a generic wording for all customer functions will be used for the input and output signals: Inputs: So every service can be called by any customer function by using a service specific request. The asterisks are the placeholders for a customer function: CFB*_s_PreCdn_StReq (Abbrev.: CuFu_PreCdnStReq) CFB_s_HydBrkAsi_StThReq (Abbrev.: CuFu_HydBrkStReq) CFB_s_WarnBrk_ItReq (Abbrev.: CuFu_WarnBrkStReq) The state of a customer function (switched on/off) depends on a corresponding Target State: CRMSA_s_SSH_StTar (Abbrev.: CuFu_StTar) each customer function uses only one target state for all used services. Outputs: Each customer function gets a specific feedback for the requested service with its corresponding status active feedback signal: SSHPOST_s_PreCdn_StAcv (Abbrev.: CuFu_PreCdnStAcv) SSHPOST_s_HydBrk_StAcv (Abbrev.: CuFu_HydBrkStAcv) SSHPOST_s_WarnBrk_StAcv (Abbrev.: CuFu_WarnBrkStAcv) Raw { "ID": "16647162.0", "ASIL": " ", "Text": "In general each of the three services (PreCdn, HydrBrk, WarnBrk) can be used by any customer function. In order to avoid repetitions a generic wording for all customer functions will be used for the input and output signals:\n\rInputs:\n\rSo every service can be called by any customer function by using a service specific request. The asterisks are the placeholders for a customer function:\n\r CFB_s_PreCdn_StReq (Abbrev.: CuFu_PreCdnStReq) \n\r CFB_s_HydBrkAsi_StThReq (Abbrev.: CuFu_HydBrkStReq) \n\r CFB_s_WarnBrk_ItReq (Abbrev.: CuFu_WarnBrkStReq) \n\rThe state of a customer function (switched on/off) depends on a corresponding Target State: \n\r CRMSA_s_SSH_StTar (Abbrev.: CuFu_StTar)\n\reach customer function uses only one target state for all used services.\n\rOutputs:\n\rEach customer function gets a specific feedback for the requested service with its corresponding status active feedback signal:\n\rSSHPOST_s_PreCdn_StAcv (Abbrev.: CuFu_PreCdnStAcv)\n\rSSHPOST_s_HydBrk_StAcv (Abbrev.: CuFu_HydBrkStAcv) \n\rSSHPOST_s_WarnBrk_StAcv (Abbrev.: CuFu_WarnBrkStAcv)", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1250656.0", "Description": "In general each of the three services (PreCdn, HydrBrk, WarnBrk) can be used by any customer function. In order to avoid repetitions a generic wording for all customer functions will be used for the input and output signals:\n\rInputs:\n\rSo every service can be called by any customer function by using a service specific request. The asterisks are the placeholders for a customer function:\n\r CFB_s_PreCdn_StReq (Abbrev.: CuFu_PreCdnStReq) \n\r CFB_s_HydBrkAsi_StThReq (Abbrev.: CuFu_HydBrkStReq) \n\r CFB_s_WarnBrk_ItReq (Abbrev.: CuFu_WarnBrkStReq) \n\rThe state of a customer function (switched on/off) depends on a corresponding Target State: \n\r CRMSA_s_SSH_StTar (Abbrev.: CuFu_StTar)\n\reach customer function uses only one target state for all used services.\n\rOutputs:\n\rEach customer function gets a specific feedback for the requested service with its corresponding status active feedback signal:\n\rSSHPOST_s_PreCdn_StAcv (Abbrev.: CuFu_PreCdnStAcv)\n\rSSHPOST_s_HydBrk_StAcv (Abbrev.: CuFu_HydBrkStAcv) \n\rSSHPOST_s_*WarnBrk_StAcv (Abbrev.: CuFu_WarnBrkStAcv)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
27	16647163.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The actual customer functions using specific services are: Pre Condition: ABAH, WBA Hydraulic Brake Assist: ABAH, WBA War The actual customer functions using specific services are: Pre Condition: ABAH, WBA Hydraulic Brake Assist: ABAH, WBA Warning Brake: ABAH, ACA, ACAHFComErr, CAA, EA, RCTA, WBA Example: This means e.g. for the hydraulic brake assist ABAH and WBA have to be tested, with the following signals: Inputs: Outputs: Or for the pre conditioning service, ABAH and WBA have to be tested, with the following signals: Inputs: Outputs: For the other customer functions and services the input and output signals are generated in the same way. Except ACA, ACAHFComErr, CAA, these customer functions don't have a return signal SSHPOST_s_ *HydBrk_StAcv Raw { "ID": "16647163.0", "ASIL": " ", "Text": "The actual customer functions using specific services are:\n\r \n\rPre Condition: \n\rABAH, WBA \n\rHydraulic Brake Assist: \n\rABAH, WBA \n\rWarning Brake: \n\rABAH, ACA, ACAHFComErr, CAA, EA, RCTA, WBA\n\r \n\r \n\rExample:\n\rThis means e.g. for the hydraulic brake assist ABAH and WBA have to be tested, with the following signals:\n\r \n\rInputs:\n\r\n\r \n\r \n\r\n\rOutputs:\n\r\n\r \n\r \n\r \n\r\n\rOr for the pre conditioning service, ABAH and WBA have to be tested, with the following signals:\n\r \n\rInputs:\n\r\n\r \n\r \n\rOutputs:\n\r \n\r\n\r \n\r \n\r \n\r\n\rFor the other customer functions and services the input and output signals are generated in the same way.\n\rExcept ACA, ACAHFComErr, CAA, these customer functions don't have a return signal SSHPOST_s_ HydBrk_StAcv\n\rCaution: Table is missing!", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1250676.0", "Description": "The actual customer functions using specific services are:\n\r \n\rPre Condition: \n\rABAH, WBA \n\rHydraulic Brake Assist: \n\rABAH, WBA \n\rWarning Brake: \n\rABAH, ACA, ACAHFComErr, CAA, EA, RCTA, WBA\n\r \n\r \n\rExample:\n\rThis means e.g. for the hydraulic brake assist ABAH and WBA have to be tested, with the following signals:\n\r \n\rInputs:\n\r\n\r \n\r \n\r\n\rOutputs:\n\r\n\r \n\r \n\r \n\r\n\rOr for the pre conditioning service, ABAH and WBA have to be tested, with the following signals:\n\r \n\rInputs:\n\r\n\r \n\r \n\rOutputs:\n\r \n\r\n\r \n\r \n\r \n\r\n\rFor the other customer functions and services the input and output signals are generated in the same way.\n\rExcept ACA, ACAHFComErr, CAA, these customer functions don't have a return signal SSHPOST_s_ **HydBrk_StAcv\n\rCaution: Table is missing!", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
28	62300868.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The actual customer functions using specific services are: Pre Condition: ABAH, AEB, WBA Hydraulic Brake Assist: ABAH, WBA The actual customer functions using specific services are: Pre Condition: ABAH, AEB, WBA Hydraulic Brake Assist: ABAH, WBA Warning Brake: ABAH, ACA, ACAHFComErr, CAA, EA, RCTA, WBA Example: This means e.g. for the hydraulic brake assist ABAH and WBA have to be tested, with the following signals: Inputs: Outputs: Or for the pre conditioning service, ABAH and WBA have to be tested, with the following signals: Inputs: Outputs: For the other customer functions and services the input and output signals are generated in the same way. Except ACA, ACAHFComErr, CAA, these customer functions don't have a return signal SSHPOST_s_ *HydBrk_StAcv Raw { "ID": "62300868.0", "ASIL": " ", "Text": "The actual customer functions using specific services are:\n\r \n\rPre Condition: \n\rABAH, AEB, WBA \n\rHydraulic Brake Assist: \n\rABAH, WBA \n\rWarning Brake: \n\rABAH, ACA, ACAHFComErr, CAA, EA, RCTA, WBA\n\r \n\r \n\rExample:\n\rThis means e.g. for the hydraulic brake assist ABAH and WBA have to be tested, with the following signals:\n\r \n\rInputs:\n\r\n\r \n\r \n\r\n\rOutputs:\n\r\n\r \n\r \n\r \n\r\n\rOr for the pre conditioning service, ABAH and WBA have to be tested, with the following signals:\n\r \n\rInputs:\n\r\n\r \n\r \n\rOutputs:\n\r \n\r\n\r \n\r \n\r \n\r\n\rFor the other customer functions and services the input and output signals are generated in the same way.\n\rExcept ACA, ACAHFComErr, CAA, these customer functions don't have a return signal SSHPOST_s_ HydBrk_StAcv\n\rCaution: Table is missing!", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "", "Description": "The actual customer functions using specific services are:\n\r \n\rPre Condition: \n\rABAH, AEB, WBA \n\rHydraulic Brake Assist: \n\rABAH, WBA \n\rWarning Brake: \n\rABAH, ACA, ACAHFComErr, CAA, EA, RCTA, WBA\n\r \n\r \n\rExample:\n\rThis means e.g. for the hydraulic brake assist ABAH and WBA have to be tested, with the following signals:\n\r \n\rInputs:\n\r\n\r \n\r \n\r\n\rOutputs:\n\r\n\r \n\r \n\r \n\r\n\rOr for the pre conditioning service, ABAH and WBA have to be tested, with the following signals:\n\r \n\rInputs:\n\r\n\r \n\r \n\rOutputs:\n\r \n\r\n\r \n\r \n\r \n\r\n\rFor the other customer functions and services the input and output signals are generated in the same way.\n\rExcept ACA, ACAHFComErr, CAA, these customer functions don't have a return signal SSHPOST_s_ **HydBrk_StAcv\n\rCaution: Table is missing!", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
29	16647164.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	General Requirements General Requirements Raw { "ID": "16647164.0", "ASIL": " ", "Text": "General Requirements", "Type": "Folder", "Status": "", "Summary": "General Requirements", "Relevant": "no", "column_12": "", "Foreign ID": "1256876.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
30	16647165.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	The requirements in chapter 4 are only valid if the specific smart service is switched on. Reversely this means if one of the fol The requirements in chapter 4 are only valid if the specific smart service is switched on. Reversely this means if one of the following parameters is false: VMMP_SSHPOST_p_WarnBrkSwtOn VMMP_SSHPOST_p_HydBrkAsiSwtOn VMMP_SSHPOST_p_PreCdnSwtOn the outputs of the relevant services should always be zero. See the following requirements: 16647166 16647167 16647168 Raw { "ID": "16647165.0", "ASIL": " QM", "Text": "The requirements in chapter 4 are only valid if the specific smart service is switched on.\n\rReversely this means if one of the following parameters is false:\n\r \n\r \n\rVMMP_SSHPOST_p_WarnBrkSwtOn \n\rVMMP_SSHPOST_p_HydBrkAsiSwtOn \n\rVMMP_SSHPOST_p_PreCdnSwtOn\n\r \n\r \n\rthe outputs of the relevant services should always be zero.\n\r \n\r \n\rSee the following requirements:\n\r16647166\n\r16647167\n\r16647168", "Type": "Pre Condition", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1113471.0", "Description": "The requirements in chapter 4 are only valid if the specific smart service is switched on.\n\rReversely this means if one of the following parameters is false:\n\r \n\r \n\rVMMP_SSHPOST_p_WarnBrkSwtOn \n\rVMMP_SSHPOST_p_HydBrkAsiSwtOn \n\rVMMP_SSHPOST_p_PreCdnSwtOn\n\r \n\r \n\rthe outputs of the relevant services should always be zero.\n\r \n\r \n\rSee the following requirements:\n\r16647166\n\r16647167\n\r16647168", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
31	16647166.0	Functional	Released	yes	True		Warning Brake: IF[1]: 1) VMMP_SSHPOST_p_WarnBrkSwtOn is false THEN: SSHPOST_s_ABAHWarnBrk_StAcv SSHPOST_s_EAWarnBrk_StAcv Warning Brake: IF[1]: 1) VMMP_SSHPOST_p_WarnBrkSwtOn is false THEN: SSHPOST_s_ABAHWarnBrk_StAcv SSHPOST_s_EAWarnBrk_StAcv SSHPOST_s_RCTAWarnBrk_StAcv SSHPOST_s_WBAWarnBrk_StAcv SSHPOST_s_WarnBrk_ItReq SSHPOST_s_WarnBrk_StResp should all be zero. Raw { "ID": "16647166.0", "ASIL": " QM", "Text": "Warning Brake:\n\rIF[1]:\n\r1) VMMP_SSHPOST_p_WarnBrkSwtOn is false\n\rTHEN:\n\rSSHPOST_s_ABAHWarnBrk_StAcv \n\rSSHPOST_s_EAWarnBrk_StAcv \n\rSSHPOST_s_RCTAWarnBrk_StAcv \n\rSSHPOST_s_WBAWarnBrk_StAcv \n\rSSHPOST_s_WarnBrk_ItReq \n\rSSHPOST_s_WarnBrk_StResp\n\rshould all be zero.", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1235070.0", "Description": "Warning Brake:\n\rIF[1]:\n\r1) VMMP_SSHPOST_p_WarnBrkSwtOn is false\n\rTHEN:\n\rSSHPOST_s_ABAHWarnBrk_StAcv \n\rSSHPOST_s_EAWarnBrk_StAcv \n\rSSHPOST_s_RCTAWarnBrk_StAcv \n\rSSHPOST_s_WBAWarnBrk_StAcv \n\rSSHPOST_s_WarnBrk_ItReq \n\rSSHPOST_s_WarnBrk_StResp\n\rshould all be zero.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
32	16647167.0	Functional	Released	yes	True		Hydraulic Brake Assist: IF[1]: 1) VMMP_SSHPOST_p_HydBrkAsiSwtOn is false THEN: SSHPOST_s_ABAHHydBrkAsi_StAcv SSHPOST_s_WBAH Hydraulic Brake Assist: IF[1]: 1) VMMP_SSHPOST_p_HydBrkAsiSwtOn is false THEN: SSHPOST_s_ABAHHydBrkAsi_StAcv SSHPOST_s_WBAHydBrkAsi_StAcv SSHPOST_s_HydBrkAsi_SThReq SSHPOST_s_HydBrkAsi_StResp should all be zero. Raw { "ID": "16647167.0", "ASIL": " QM", "Text": "Hydraulic Brake Assist: \n\rIF[1]:\n\r1) VMMP_SSHPOST_p_HydBrkAsiSwtOn is false\n\rTHEN:\n\rSSHPOST_s_ABAHHydBrkAsi_StAcv \n\rSSHPOST_s_WBAHydBrkAsi_StAcv \n\rSSHPOST_s_HydBrkAsi_SThReq \n\rSSHPOST_s_HydBrkAsi_StResp\n\rshould all be zero.", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1235072.0", "Description": "Hydraulic Brake Assist: \n\rIF[1]:\n\r1) VMMP_SSHPOST_p_HydBrkAsiSwtOn is false\n\rTHEN:\n\rSSHPOST_s_ABAHHydBrkAsi_StAcv \n\rSSHPOST_s_WBAHydBrkAsi_StAcv \n\rSSHPOST_s_HydBrkAsi_SThReq \n\rSSHPOST_s_HydBrkAsi_StResp\n\rshould all be zero.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
33	16647168.0	Functional	Released	yes	True		Pre Condition: IF[1]: 1) VMMP_SSHPOST_p_PreCdnSwtOn is false THEN: SSHPOST_s_ABAHPreCdn_StAcv SSHPOST_s_WBAPreCdn_StAcv S Pre Condition: IF[1]: 1) VMMP_SSHPOST_p_PreCdnSwtOn is false THEN: SSHPOST_s_ABAHPreCdn_StAcv SSHPOST_s_WBAPreCdn_StAcv SSHPOST_s_PreCdn_StDynDrvBrk SSHPOST_s_PreCdn_StResp should all be zero. Raw { "ID": "16647168.0", "ASIL": " QM", "Text": "Pre Condition: \n\rIF[1]:\n\r1) VMMP_SSHPOST_p_PreCdnSwtOn is false\n\rTHEN:\n\rSSHPOST_s_ABAHPreCdn_StAcv \n\rSSHPOST_s_WBAPreCdn_StAcv \n\rSSHPOST_s_PreCdn_StDynDrvBrk \n\rSSHPOST_s_PreCdn_StResp\n\rshould all be zero.", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1235078.0", "Description": "Pre Condition: \n\rIF[1]:\n\r1) VMMP_SSHPOST_p_PreCdnSwtOn is false\n\rTHEN:\n\rSSHPOST_s_ABAHPreCdn_StAcv \n\rSSHPOST_s_WBAPreCdn_StAcv \n\rSSHPOST_s_PreCdn_StDynDrvBrk \n\rSSHPOST_s_PreCdn_StResp\n\rshould all be zero.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
34	63714812.0	Functional	Released	yes	True		Pre Condition: IF[1]: 1) VMMP_SSHPOST_p_PreCdnSwtOn is false THEN: SSHPOST_s_ABAHPreCdn_StAcv SSHPOST_s_WBAPreCdn_StAcv S Pre Condition: IF[1]: 1) VMMP_SSHPOST_p_PreCdnSwtOn is false THEN: SSHPOST_s_ABAHPreCdn_StAcv SSHPOST_s_WBAPreCdn_StAcv SSHPOST_s_PreCdn_StDynDrvBrk SSHPOST_s_PreCdn_StResp SSHPOST_s_AEBPreCdn_StAcv should all be zero. Raw { "ID": "63714812.0", "ASIL": " QM", "Text": "Pre Condition: \n\rIF[1]:\n\r1) VMMP_SSHPOST_p_PreCdnSwtOn is false\n\rTHEN:\n\rSSHPOST_s_ABAHPreCdn_StAcv \n\rSSHPOST_s_WBAPreCdn_StAcv \n\rSSHPOST_s_PreCdn_StDynDrvBrk \n\rSSHPOST_s_PreCdn_StResp \n\rSSHPOST_s_AEBPreCdn_StAcv\n\rshould all be zero.", "Type": "Functional", "Status": "Released", "Summary": "PreCdn disabled", "Relevant": "yes", "column_12": "", "Foreign ID": "1235078.0", "Description": "Pre Condition: \n\rIF[1]:\n\r1) VMMP_SSHPOST_p_PreCdnSwtOn is false\n\rTHEN:\n\rSSHPOST_s_ABAHPreCdn_StAcv \n\rSSHPOST_s_WBAPreCdn_StAcv \n\rSSHPOST_s_PreCdn_StDynDrvBrk \n\rSSHPOST_s_PreCdn_StResp \n\rSSHPOST_s_AEBPreCdn_StAcv\n\rshould all be zero.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
35	23649240.0	Functional	Released	yes	True		IF[1] 1) A target state for a customer function switches to off, means: CRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHSt IF[1] 1) A target state for a customer function switches to off, means: CRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHStTarOff THEN[1] 1) all related CuFu response signals CuFu_*StAcv should be zero (Off) ELSEIF[1] 1) A target state for a customer function switches to failure, means: CRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHStTarFail THEN 1) all related CuFu response signals CuFu_StAcv should be 7 (Failure) ELSE 1) normal output, see requirements (see chapter 4) are valid. Raw { "ID": "23649240.0", "ASIL": " QM", "Text": "IF[1]\n\r1) A target state for a customer function switches to off, means:\n\rCRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHStTarOff\n\r \n\rTHEN[1]\n\r1) all related CuFu response signals CuFu_StAcv should be zero (Off)\n\r \n\rELSEIF[1]\n\r1) A target state for a customer function switches to failure, means:\n\rCRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHStTarFail\n\r \n\rTHEN\n\r1) all related CuFu response signals CuFu_StAcv should be 7 (Failure)\n\r \n\rELSE\n\r1) normal output, see requirements (see chapter 4) are valid.", "Type": "Functional", "Status": "Released", "Summary": "Customer Function Targetstates (On/Off/Fail)", "Relevant": "yes", "column_12": "", "Foreign ID": "", "Description": "IF[1]\n\r1) A target state for a customer function switches to off, means:\n\rCRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHStTarOff\n\r \n\rTHEN[1]\n\r1) all related CuFu response signals CuFu_StAcv should be zero (Off)\n\r \n\rELSEIF[1]\n\r1) A target state for a customer function switches to failure, means:\n\rCRMSA_s_CuFuSSH_StTar is equal to VMMP_CRMSA_c_CuFuSSHStTarFail\n\r \n\rTHEN\n\r1) all related CuFu response signals CuFu_*StAcv should be 7 (Failure)\n\r \n\rELSE\n\r1) normal output, see requirements (see chapter 4) are valid.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
36	16647169.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Requirements Requirements Raw { "ID": "16647169.0", "ASIL": " ", "Text": "Requirements", "Type": "Folder", "Status": "", "Summary": "Requirements", "Relevant": "no", "column_12": "", "Foreign ID": "1113200.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
37	16647170.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	This chapter describes the requirements for the different specific services: * Pre Conditioning * Hydraulic Brake Assist * Warn This chapter describes the requirements for the different specific services: * Pre Conditioning * Hydraulic Brake Assist * Warning Brake Raw { "ID": "16647170.0", "ASIL": " ", "Text": "This chapter describes the requirements for the different specific services:\n\r* Pre Conditioning\n\r* Hydraulic Brake Assist\n\r* Warning Brake", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1256896.0", "Description": "This chapter describes the requirements for the different specific services:\n\r* Pre Conditioning\n\r* Hydraulic Brake Assist\n\r* Warning Brake", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
38	16647171.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Brake Pre Conditioning Brake Pre Conditioning Raw { "ID": "16647171.0", "ASIL": " ", "Text": "Brake Pre Conditioning", "Type": "Folder", "Status": "", "Summary": "Brake Pre Conditioning", "Relevant": "no", "column_12": "", "Foreign ID": "1113475.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
39	16647172.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF[AND(1,2,3)]: 1) The Targetstate CRMSA_s_SSH_StTarPreCdn for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_Pre IF[AND(1,2,3)]: 1) The Targetstate CRMSA_s_SSH_StTarPreCdn for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOn 2) The Pre Conditioning service is available, meaning ASOAF_s_PreCdn_StAvl is equal to one. 3) There was no request (SSHPOST_s_PreCdn_StDynDrvBrk) in the past, for at least greater double the time of requests since startup. THEN: 1) the following requirements for Brake Pre Conditioning should be fulfilled. Raw { "ID": "16647172.0", "ASIL": " QM", "Text": "IF[AND(1,2,3)]:\n\r1) The Targetstate CRMSA_s_SSH_StTarPreCdn for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOn\n\r2) The Pre Conditioning service is available, meaning ASOAF_s_PreCdn_StAvl is equal to one.\n\r3) There was no request (SSHPOST_s_PreCdn_StDynDrvBrk) in the past, for at least greater double the time of requests since startup.\n\rTHEN:\n\r1) the following requirements for Brake Pre Conditioning should be fulfilled.", "Type": "Pre Condition", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1211326.0", "Description": "IF[AND(1,2,3)]:\n\r1) The Targetstate CRMSA_s_SSH_StTarPreCdn for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOn\n\r2) The Pre Conditioning service is available, meaning ASOAF_s_PreCdn_StAvl is equal to one.\n\r3) There was no request (SSHPOST_s_PreCdn_StDynDrvBrk) in the past, for at least greater double the time of requests since startup.\n\rTHEN:\n\r1) the following requirements for Brake Pre Conditioning should be fulfilled.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
40	16647173.0	Functional	Released	yes	True		Request Safety IF[1]: 1) the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, Request Safety IF[1]: 1) the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>=10s THEN[1,2,3]: 1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should be set to zero 2) SSHPOST_s_PreCdn_StResp = NotAvailable (0) 3) The response signals to all customer functions CuFu_PreCdnStAcv should be NotAvailable (2) Raw { "ID": "16647173.0", "ASIL": " ASIL D", "Text": "Request Safety \n\rIF[1]:\n\r1) the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>=10s\n\rTHEN[1,2,3]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should be set to zero\n\r2) SSHPOST_s_PreCdn_StResp = NotAvailable (0)\n\r3) The response signals to all customer functions CuFu_PreCdnStAcv should be NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1240892.0", "Description": "Request Safety \n\rIF[1]:\n\r1) the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>=10s\n\rTHEN[1,2,3]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should be set to zero\n\r2) SSHPOST_s_PreCdn_StResp = NotAvailable (0)\n\r3) The response signals to all customer functions CuFu_PreCdnStAcv should be NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
41	16647174.0	Functional	Released	yes	True		Request Safety, NotAvailable other CuFu IF[1]: 1) one customer function is requesting in one piece longer than 8 seconds brake c Request Safety, NotAvailable other CuFu IF[1]: 1) one customer function is requesting in one piece longer than 8 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>8s THEN[1]: 1) The response signals to the other customer functions, CuFu_PreCdnStAcv, should be NotAvailable (2) Raw { "ID": "16647174.0", "ASIL": " QM", "Text": "Request Safety, NotAvailable other CuFu\n\rIF[1]:\n\r1) one customer function is requesting in one piece longer than 8 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>8s\n\rTHEN[1]:\n\r1) The response signals to the other customer functions, CuFu_PreCdnStAcv, should be NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1362558.0", "Description": "Request Safety, NotAvailable other CuFu\n\rIF[1]:\n\r1) one customer function is requesting in one piece longer than 8 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>8s\n\rTHEN[1]:\n\r1) The response signals to the other customer functions, CuFu_PreCdnStAcv, should be NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
42	16647175.0	Functional	Released	yes	True		Request Safety, Request of other CuFu IF AND[1,2]: 1) one customer function is requesting in one piece for 9 seconds brake condi Request Safety, Request of other CuFu IF AND[1,2]: 1) one customer function is requesting in one piece for 9 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t=9s, and cancels its request at t=9.01s, CuFu_PreCdnStReq == 0. 2) another customer function is requesting at t=9s, meaning CuFu_PreCdnStReq == 1 THEN[1,2,3]: 1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should be set to zero 2) SSHPOST_s_PreCdn_StResp = NotAvailable (0) 3) The response signals to all customer functions CuFu_PreCdnStAcv should be NotAvailable (2) Raw { "ID": "16647175.0", "ASIL": " QM", "Text": "Request Safety, Request of other CuFu\n\rIF AND[1,2]:\n\r1) one customer function is requesting in one piece for 9 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t=9s, and cancels its request at t=9.01s, CuFu_PreCdnStReq == 0.\n\r2) another customer function is requesting at t=9s, meaning CuFu_PreCdnStReq == 1\n\rTHEN[1,2,3]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should be set to zero\n\r2) SSHPOST_s_PreCdn_StResp = NotAvailable (0)\n\r3) The response signals to all customer functions CuFu_PreCdnStAcv should be NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1362560.0", "Description": "Request Safety, Request of other CuFu\n\rIF AND[1,2]:\n\r1) one customer function is requesting in one piece for 9 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t=9s, and cancels its request at t=9.01s, CuFu_PreCdnStReq == 0.\n\r2) another customer function is requesting at t=9s, meaning CuFu_PreCdnStReq == 1\n\rTHEN[1,2,3]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should be set to zero\n\r2) SSHPOST_s_PreCdn_StResp = NotAvailable (0)\n\r3) The response signals to all customer functions CuFu_PreCdnStAcv should be NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
43	16647176.0	Functional	Released	yes	True		Request Safety, CoolDown, NotAvailable --> Available IF [1]: 1)the customer functions are requesting in one piece longer or equa Request Safety, CoolDown, NotAvailable --> Available IF [1]: 1)the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>=10s THEN: IF [1]: 1) Another customer function tries to request within the next 4s, CuFu_PreCdnStReq == 1 within 10s<t<14s THEN AND[1,2,3]: 1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should remain zero 2) SSHPOST_s_PreCdn_StResp should remain NotAvailable (0) 3) The response signals to all customer functions CuFu_PreCdnStAcv should remain NotAvailable (2) ELSEIF[1]: 1) Another customer function tries to request after 14s, CuFu_PreCdnStReq == 1 for t>14s THEN AND[1,2,3,4]: 1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should change to one 2) SSHPOST_s_PreCdn_StResp should change to NotAvailable (0) 3) The response signal to the requesting customer function CuFu_PreCdnStAcv should be Active (4) 4) The response signals to all non requesting customer functions CuFu_PreCdnStAcv should be NotAvailable (2) Raw { "ID": "16647176.0", "ASIL": " ASIL D", "Text": "Request Safety, CoolDown, NotAvailable --> Available\n\rIF [1]:\n\r1)the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>=10s\n\r \n\rTHEN:\n\rIF [1]:\n\r1) Another customer function tries to request within the next 4s, CuFu_PreCdnStReq == 1 within 10s<t<14s\n\rTHEN AND[1,2,3]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should remain zero\n\r2) SSHPOST_s_PreCdn_StResp should remain NotAvailable (0)\n\r3) The response signals to all customer functions CuFu_PreCdnStAcv should remain NotAvailable (2)\n\rELSEIF[1]:\n\r1) Another customer function tries to request after 14s, CuFu_PreCdnStReq == 1 for t>14s\n\rTHEN AND[1,2,3,4]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should change to one\n\r2) SSHPOST_s_PreCdn_StResp should change to NotAvailable (0)\n\r3) The response signal to the requesting customer function CuFu_PreCdnStAcv should be Active (4)\n\r4) The response signals to all non requesting customer functions CuFu_PreCdnStAcv should be NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1362670.0", "Description": "Request Safety, CoolDown, NotAvailable --> Available\n\rIF [1]:\n\r1)the customer functions are requesting in one piece longer or equal than 10 seconds brake conditioning, CuFu_PreCdnStReq == 1, for t>=10s\n\r \n\rTHEN:\n\rIF [1]:\n\r1) Another customer function tries to request within the next 4s, CuFu_PreCdnStReq == 1 within 10s<t<14s\n\rTHEN AND[1,2,3]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should remain zero\n\r2) SSHPOST_s_PreCdn_StResp should remain NotAvailable (0)\n\r3) The response signals to all customer functions CuFu_PreCdnStAcv should remain NotAvailable (2)\n\rELSEIF[1]:\n\r1) Another customer function tries to request after 14s, CuFu_PreCdnStReq == 1 for t>14s\n\rTHEN AND[1,2,3,4]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should change to one\n\r2) SSHPOST_s_PreCdn_StResp should change to NotAvailable (0)\n\r3) The response signal to the requesting customer function CuFu_PreCdnStAcv should be Active (4)\n\r4) The response signals to all non requesting customer functions CuFu_PreCdnStAcv should be NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
44	16647177.0	Functional	Released	yes	True		Request: IF[1]: 1) only one of the CuFu_PreCdnStReq is requesting (rising edge) THEN[1,2,3]: 1) The request signal SSHPOST_s_ Request: IF[1]: 1) only one of the CuFu_PreCdnStReq is requesting (rising edge) THEN[1,2,3]: 1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should change to Request (1) 2) The response signal SSHPOST_s_PreCdn_StResp should be equal to active (2) 3) The response signal of the requesting customer function CuFu_PreCdnStAcv should change to active (4) 4) The respond signal of the non requesting customer functions CuFu_PreCdnStAcv should be available (1) Raw { "ID": "16647177.0", "ASIL": " QM", "Text": "Request: \n\rIF[1]:\n\r1) only one of the CuFu_PreCdnStReq is requesting (rising edge)\n\rTHEN[1,2,3]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should change to Request (1)\n\r2) The response signal SSHPOST_s_PreCdn_StResp should be equal to active (2)\n\r3) The response signal of the requesting customer function CuFu_PreCdnStAcv should change to active (4)\n\r4) The respond signal of the non requesting customer functions CuFu_PreCdnStAcv should be available (1)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1240884.0", "Description": "Request: \n\rIF[1]:\n\r1) only one of the CuFu_PreCdnStReq is requesting (rising edge)\n\rTHEN[1,2,3]:\n\r1) The request signal SSHPOST_s_PreCdn_StDynDrvBrk should change to Request (1)\n\r2) The response signal SSHPOST_s_PreCdn_StResp should be equal to active (2)\n\r3) The response signal of the requesting customer function CuFu_PreCdnStAcv should change to active (4)\n\r4) The respond signal of the non requesting customer functions CuFu_PreCdnStAcv should be available (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
45	16647178.0	Functional	Released	yes	True		No Request: IF[1]: the function is not in initialisation or failure state and none of the customer functions is requesting Bra No Request: IF[1]: the function is not in initialisation or failure state and none of the customer functions is requesting Brake Pre Conditioning: 1) All CuFu_PreCdnStReq = 0 THEN[1,2,3]: 1) The request to the brake system should be SSHPOST_s_PreCdn_StDynDrvBrk = 0 2) SSHPOST_s_PreCdn_StResp should be Ready (1) 3) All status active respond signals, CuFu_PreCdnStAcv, should be Available (1) Raw { "ID": "16647178.0", "ASIL": " QM", "Text": "No Request: \n\rIF[1]: \n\rthe function is not in initialisation or failure state and none of the customer functions is requesting Brake Pre Conditioning:\n\r1) All CuFu_PreCdnStReq = 0\n\rTHEN[1,2,3]: \n\r1) The request to the brake system should be SSHPOST_s_PreCdn_StDynDrvBrk = 0\n\r2) SSHPOST_s_PreCdn_StResp should be Ready (1)\n\r3) All status active respond signals, CuFu_PreCdnStAcv, should be Available (1)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1240890.0", "Description": "No Request: \n\rIF[1]: \n\rthe function is not in initialisation or failure state and none of the customer functions is requesting Brake Pre Conditioning:\n\r1) All CuFu_PreCdnStReq = 0\n\rTHEN[1,2,3]: \n\r1) The request to the brake system should be SSHPOST_s_PreCdn_StDynDrvBrk = 0\n\r2) SSHPOST_s_PreCdn_StResp should be Ready (1)\n\r3) All status active respond signals, CuFu_PreCdnStAcv, should be Available (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
46	16647179.0	Functional	Released	yes	True		Targetstate Fail: IF[OR(1,2)]: 1) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff 2) the T Targetstate Fail: IF[OR(1,2)]: 1) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff 2) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff in the previous timestep THEN: IF: 1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnFail (Failure) THEN: 1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0 2) SSHPOST_s_PreCdn_StResp should be Failure (7) 3) Each customer status active signal CuFu_PreCdnStAcv should be Failure (7) ELSEIF: 1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnIni (Init) THEN: 1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0 2) SSHPOST_s_PreCdn_StResp should be Init (6) 3) Each customer status active signal CuFu_PreCdnStAcv should be Init (6) ELSEIF: 1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable) THEN: 1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0 2) SSHPOST_s_PreCdn_StResp should be NotAvailable (0) 3) Each customer status active signal CuFu_PreCdnStAcv should be NotAvailable (2) Raw { "ID": "16647179.0", "ASIL": " QM", "Text": "Targetstate Fail: \n\rIF[OR(1,2)]:\n\r1) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff\n\r2) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff in the previous timestep\n\rTHEN: \n\rIF:\n\r1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN:\n\r1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0\n\r2) SSHPOST_s_PreCdn_StResp should be Failure (7)\n\r3) Each customer status active signal CuFu_PreCdnStAcv should be Failure (7)\n\r \n\rELSEIF:\n\r1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN:\n\r1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0\n\r2) SSHPOST_s_PreCdn_StResp should be Init (6)\n\r3) Each customer status active signal CuFu_PreCdnStAcv should be Init (6)\n\r \n\rELSEIF:\n\r1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN:\n\r1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0\n\r2) SSHPOST_s_PreCdn_StResp should be NotAvailable (0)\n\r3) Each customer status active signal CuFu_PreCdnStAcv should be NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1256898.0", "Description": "Targetstate Fail: \n\rIF[OR(1,2)]:\n\r1) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff\n\r2) the Targetstate CRMSA_s_SSH_StTarPreCdn is equal to VMMP_CRMSA_c_SSH_PreCdnStTarOff in the previous timestep\n\rTHEN: \n\rIF:\n\r1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN:\n\r1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0\n\r2) SSHPOST_s_PreCdn_StResp should be Failure (7)\n\r3) Each customer status active signal CuFu_PreCdnStAcv should be Failure (7)\n\r \n\rELSEIF:\n\r1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN:\n\r1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0\n\r2) SSHPOST_s_PreCdn_StResp should be Init (6)\n\r3) Each customer status active signal CuFu_PreCdnStAcv should be Init (6)\n\r \n\rELSEIF:\n\r1) CRMSA_s_SSH_StDgrdRsnPreCdn is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN:\n\r1) SSHPOST_s_PreCdn_StDynDrvBrk should be 0\n\r2) SSHPOST_s_PreCdn_StResp should be NotAvailable (0)\n\r3) Each customer status active signal CuFu_PreCdnStAcv should be NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
47	16647180.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Hydraulic Brake Assist Hydraulic Brake Assist Raw { "ID": "16647180.0", "ASIL": " ", "Text": "Hydraulic Brake Assist", "Type": "Folder", "Status": "", "Summary": "Hydraulic Brake Assist", "Relevant": "no", "column_12": "", "Foreign ID": "1250679.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
48	16647181.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF[AND(1,2)]: 1) The Targetstate CRMSA_s_SSH_StTarHydBrk for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_HydBr IF[AND(1,2)]: 1) The Targetstate CRMSA_s_SSH_StTarHydBrk for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOn 2) The hydraulic brake assist is available, meaning ASOAF_s_HydBrkAsi_StAvl is equal to one. THEN: 1) the following requirements for Hydraulic Brake Assist should be fulfilled. Raw { "ID": "16647181.0", "ASIL": " QM", "Text": "IF[AND(1,2)]:\n\r1) The Targetstate CRMSA_s_SSH_StTarHydBrk for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOn\n\r2) The hydraulic brake assist is available, meaning ASOAF_s_HydBrkAsi_StAvl is equal to one.\n\rTHEN:\n\r1) the following requirements for Hydraulic Brake Assist should be fulfilled.", "Type": "Pre Condition", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1256920.0", "Description": "IF[AND(1,2)]:\n\r1) The Targetstate CRMSA_s_SSH_StTarHydBrk for the actual and the previous cycle is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOn\n\r2) The hydraulic brake assist is available, meaning ASOAF_s_HydBrkAsi_StAvl is equal to one.\n\rTHEN:\n\r1) the following requirements for Hydraulic Brake Assist should be fulfilled.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
49	16647182.0	Functional	Released	yes	True		No Request: IF[1]: the function is not in initialisation or failure state and none of the customer functions is requesting a h No Request: IF[1]: the function is not in initialisation or failure state and none of the customer functions is requesting a hydraulic brake assist threshold, which means 1) Each CuFu_HydBrkStReq is NoRequest (0) THEN[1,2,3]: 1) The request to the brake system should be SSHPOST_s_HydBrkAsi_SThReq = NoReq (0) 2) SSHPOST_s_HydBrkAsi_StResp should be Normal (1) 3) All status active respond signals, CuFu_HydBrkStAcv,should be Available (1) Raw { "ID": "16647182.0", "ASIL": " QM", "Text": "No Request: \n\rIF[1]: \n\rthe function is not in initialisation or failure state and none of the customer functions is requesting a hydraulic brake assist threshold, which means\n\r1) Each CuFu_HydBrkStReq is NoRequest (0)\n\rTHEN[1,2,3]: \n\r1) The request to the brake system should be SSHPOST_s_HydBrkAsi_SThReq = NoReq (0)\n\r2) SSHPOST_s_HydBrkAsi_StResp should be Normal (1)\n\r3) All status active respond signals, CuFu_HydBrkStAcv,should be Available (1)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1256922.0", "Description": "No Request: \n\rIF[1]: \n\rthe function is not in initialisation or failure state and none of the customer functions is requesting a hydraulic brake assist threshold, which means\n\r1) Each CuFu_HydBrkStReq is NoRequest (0)\n\rTHEN[1,2,3]: \n\r1) The request to the brake system should be SSHPOST_s_HydBrkAsi_SThReq = NoReq (0)\n\r2) SSHPOST_s_HydBrkAsi_StResp should be Normal (1)\n\r3) All status active respond signals, CuFu_HydBrkStAcv,should be Available (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
50	16647183.0	Functional	Released	yes	True		Request: IF[1]: 1) One or more customer functions are requesting a specific threshold CuFu_HydBrkStReq (1-3) THEN[1,2,3]: 1) Request: IF[1]: 1) One or more customer functions are requesting a specific threshold CuFu_HydBrkStReq (1-3) THEN[1,2,3]: 1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should change to the maximimum of the requested threshold max(CuFu_HydBrkStReq) 2) SSHPOST_s_HydBrkAsi_StResp should change to the maximimum of the requested threshold (max(CuFu_HydBrkStReq) + 1) 3)IF[1]: 1) The request of a customer function CuFuHydBrkAsi_StThReq is equal to SSHPOST_s_HydBrkAsi_SThReq THEN[1]: 1) The respond signal of the requesting customer function CuFu_HydBrkStAcv should change to active (4) ELSIF[1]: 1) The request of a customer function CuFuHydBrkAsi_StThReq is greater than zero and smaller than SSHPOST_s_HydBrkAsi_SThReq THEN[1]: 1) The respond signal of the requesting customer function CuFu_HydBrkStAcv should change to standby (3) ELSE[1]: 1) The respond signal of the non requesting customer functions, which means CuFu_HydBrkStAcv should be available (1) Raw { "ID": "16647183.0", "ASIL": " QM", "Text": "Request: \n\rIF[1]:\n\r1) One or more customer functions are requesting a specific threshold\n\rCuFu_HydBrkStReq (1-3)\n\rTHEN[1,2,3]:\n\r1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should change to the maximimum of the requested threshold max(CuFu_HydBrkStReq)\n\r2) SSHPOST_s_HydBrkAsi_StResp should change to the maximimum of the requested threshold (max(CuFu_HydBrkStReq) + 1)\n\r3)IF[1]:\n\r1) The request of a customer function CuFuHydBrkAsi_StThReq is equal to\n\rSSHPOST_s_HydBrkAsi_SThReq\n\rTHEN[1]: \n\r1) The respond signal of the requesting customer function CuFu_HydBrkStAcv should change to active (4)\n\rELSIF[1]: \n\r1) The request of a customer function CuFuHydBrkAsi_StThReq is greater than zero and smaller than SSHPOST_s_HydBrkAsi_SThReq\n\rTHEN[1]: \n\r1) The respond signal of the requesting customer function CuFu_HydBrkStAcv should change to standby (3)\n\rELSE[1]:\n\r1) The respond signal of the non requesting customer functions, which means\n\rCuFu_HydBrkStAcv should be available (1)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1256924.0", "Description": "Request: \n\rIF[1]:\n\r1) One or more customer functions are requesting a specific threshold\n\rCuFu_HydBrkStReq (1-3)\n\rTHEN[1,2,3]:\n\r1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should change to the maximimum of the requested threshold max(CuFu_HydBrkStReq)\n\r2) SSHPOST_s_HydBrkAsi_StResp should change to the maximimum of the requested threshold (max(CuFu_HydBrkStReq) + 1)\n\r3)IF[1]:\n\r1) The request of a customer function CuFuHydBrkAsi_StThReq is equal to\n\rSSHPOST_s_HydBrkAsi_SThReq\n\rTHEN[1]: \n\r1) The respond signal of the requesting customer function CuFu_HydBrkStAcv should change to active (4)\n\rELSIF[1]: \n\r1) The request of a customer function CuFuHydBrkAsi_StThReq is greater than zero and smaller than SSHPOST_s_HydBrkAsi_SThReq\n\rTHEN[1]: \n\r1) The respond signal of the requesting customer function CuFu_HydBrkStAcv should change to standby (3)\n\rELSE[1]:\n\r1) The respond signal of the non requesting customer functions, which means\n\rCuFu_HydBrkStAcv should be available (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
51	16647184.0	Functional	Released	yes	True		CuFu Request too long: IF[1]: 1) One customer function is requesting a specific threshold CuFu_HydBrkStReq (1-3) for more than CuFu Request too long: IF[1]: 1) One customer function is requesting a specific threshold CuFu_HydBrkStReq (1-3) for more than (VMMP_SSHPOST_p_HydBrkCusFctRstCtrLimUpprVMMP_c_TiSmpl) seconds. THEN[1,2,3]: 1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should change to zero 2) SSHPOST_s_HydBrkAsi_StResp should change to Available (1) 3) The respond signal of all customer functions, CuFu_HydBrkStAcv, should be available (1) Raw { "ID": "16647184.0", "ASIL": " QM", "Text": "CuFu Request too long: \n\rIF[1]:\n\r1) One customer function is requesting a specific threshold\n\rCuFu_HydBrkStReq (1-3) for more than (VMMP_SSHPOST_p_HydBrkCusFctRstCtrLimUpprVMMP_c_TiSmpl) seconds.\n\rTHEN[1,2,3]:\n\r1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should change to zero\n\r2) SSHPOST_s_HydBrkAsi_StResp should change to Available (1)\n\r3) The respond signal of all customer functions, CuFu_HydBrkStAcv, should be available (1)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1362731.0", "Description": "CuFu Request too long: \n\rIF[1]:\n\r1) One customer function is requesting a specific threshold\n\rCuFu_HydBrkStReq (1-3) for more than (VMMP_SSHPOST_p_HydBrkCusFctRstCtrLimUppr*VMMP_c_TiSmpl) seconds.\n\rTHEN[1,2,3]:\n\r1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should change to zero\n\r2) SSHPOST_s_HydBrkAsi_StResp should change to Available (1)\n\r3) The respond signal of all customer functions, CuFu_HydBrkStAcv, should be available (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
52	16647185.0	Functional	Released	yes	True		Actuator State is Not Available: IF[AND(1,2)]: 1) Actuator state ASOAF_s_HydBrkAsi_StAvl is NotAvailable (0) 2) Independent of Actuator State is Not Available: IF[AND(1,2)]: 1) Actuator state ASOAF_s_HydBrkAsi_StAvl is NotAvailable (0) 2) Independent of the customer function request threshold, which means CuFu_HydBrkStReq (0-3) THEN[1,2,3]: 1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should always be zero 2) SSHPOST_s_HydBrkAsi_StResp should change to NotAvailable (0) 3) The respond signal of all customer functions, CuFu_HydBrkStAcv, should be NotAvailable (2) Raw { "ID": "16647185.0", "ASIL": " QM", "Text": "Actuator State is Not Available: \n\rIF[AND(1,2)]:\n\r1) Actuator state ASOAF_s_HydBrkAsi_StAvl is NotAvailable (0)\n\r2) Independent of the customer function request threshold, which means CuFu_HydBrkStReq (0-3)\n\rTHEN[1,2,3]:\n\r1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should always be zero\n\r2) SSHPOST_s_HydBrkAsi_StResp should change to NotAvailable (0)\n\r3) The respond signal of all customer functions, CuFu_HydBrkStAcv, should be NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1399746.0", "Description": "Actuator State is Not Available: \n\rIF[AND(1,2)]:\n\r1) Actuator state ASOAF_s_HydBrkAsi_StAvl is NotAvailable (0)\n\r2) Independent of the customer function request threshold, which means CuFu_HydBrkStReq (0-3)\n\rTHEN[1,2,3]:\n\r1) The outputsignal SSHPOST_s_HydBrkAsi_SThReq should always be zero\n\r2) SSHPOST_s_HydBrkAsi_StResp should change to NotAvailable (0)\n\r3) The respond signal of all customer functions, CuFu_HydBrkStAcv, should be NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
53	16647186.0	Functional	Released	yes	True		Targetstate Fail: IF[OR(1,2)]: 1) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff 2) the T Targetstate Fail: IF[OR(1,2)]: 1) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff 2) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff in the previous timestep THEN: IF: 1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnFail (Failure) THEN: 1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0) 2) SSHPOST_s_HydBrkAsi_StResp should be Failure (7) 3) Each customer status active signal CuFu_HydBrkStAcv should be Failure (7) ELSEIF: 1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnIni (Init) THEN[1,2,3]: 1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0) 2) SSHPOST_s_HydBrkAsi_StResp should be Init (6) 3) Each customer status active signal CuFu_HydBrkStAcv should be Init (6) ELSEIF: 1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable) THEN[1,2,3]: 1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0) 2) SSHPOST_s_HydBrkAsi_StResp should be NotAvailable (0) 3) Each customer status active signal CuFu_HydBrkStAcv should be NotAvailable (2) Raw { "ID": "16647186.0", "ASIL": " QM", "Text": "Targetstate Fail: \n\rIF[OR(1,2)]:\n\r1) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff\n\r2) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff in the previous timestep\n\rTHEN: \n\rIF:\n\r1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN:\n\r1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)\n\r2) SSHPOST_s_HydBrkAsi_StResp should be Failure (7)\n\r3) Each customer status active signal CuFu_HydBrkStAcv should be Failure (7)\n\r \n\rELSEIF:\n\r1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN[1,2,3]:\n\r1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)\n\r2) SSHPOST_s_HydBrkAsi_StResp should be Init (6)\n\r3) Each customer status active signal CuFu_HydBrkStAcv should be Init (6)\n\r \n\rELSEIF:\n\r1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN[1,2,3]:\n\r1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)\n\r2) SSHPOST_s_HydBrkAsi_StResp should be NotAvailable (0)\n\r3) Each customer status active signal CuFu_HydBrkStAcv should be NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1256956.0", "Description": "Targetstate Fail: \n\rIF[OR(1,2)]:\n\r1) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff\n\r2) the Targetstate CRMSA_s_SSH_StTarHydBrk is equal to VMMP_CRMSA_c_SSH_HydBrkStTarOff in the previous timestep\n\rTHEN: \n\rIF:\n\r1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN:\n\r1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)\n\r2) SSHPOST_s_HydBrkAsi_StResp should be Failure (7)\n\r3) Each customer status active signal CuFu_HydBrkStAcv should be Failure (7)\n\r \n\rELSEIF:\n\r1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN[1,2,3]:\n\r1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)\n\r2) SSHPOST_s_HydBrkAsi_StResp should be Init (6)\n\r3) Each customer status active signal CuFu_HydBrkStAcv should be Init (6)\n\r \n\rELSEIF:\n\r1) CRMSA_s_SSH_StDgrdRsnHydBrk is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN[1,2,3]:\n\r1) SSHPOST_s_HydBrkAsi_SThReq should be NoRequest (0)\n\r2) SSHPOST_s_HydBrkAsi_StResp should be NotAvailable (0)\n\r3) Each customer status active signal CuFu_HydBrkStAcv should be NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
54	16647187.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Warning Brake Warning Brake Raw { "ID": "16647187.0", "ASIL": " ", "Text": "Warning Brake", "Type": "Folder", "Status": "", "Summary": "Warning Brake", "Relevant": "no", "column_12": "", "Foreign ID": "1250681.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
55	16647188.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	The precondition for the following requirements is, the availability of the braking system and correct customer function requests, The precondition for the following requirements is, the availability of the braking system and correct customer function requests, which means: IF AND[1,2,3,4,5]: 1) The target state conditions for warning brake service is true, CRMSA_s_SSH_StTarWarnBrk is equal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for at least 2 cycles. 2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is equal to VMMP_CRMSA_c_SSH_ASILAStTarOn for at least 2 cycles. 3) At the beginning the availability of the brake system ASOAF_s_WarnBrk_StResp should be set to 1 (Ready) 4) Overdeceleration protection velocity signal VSOEM_s_VDeltaLnBdryASILA should be higher than VMMP_SSHPOST_p_vASILHysSwtOn 5) The target state for each each customer function is on, means: CRMSA_s___CuFuSSH_StTar is equal to VMMP_CRMSA_c___CuFuSSHStTarOn THEN: The following requirements should be tested. Raw { "ID": "16647188.0", "ASIL": " QM", "Text": "The precondition for the following requirements is, the availability of the braking system and correct customer function requests, which means:\n\r \n\rIF AND[1,2,3,4,5]: \n\r1) The target state conditions for warning brake service is true, CRMSA_s_SSH_StTarWarnBrk is equal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for at least 2 cycles.\n\r2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is equal to VMMP_CRMSA_c_SSH_ASILAStTarOn for at least 2 cycles.\n\r3) At the beginning the availability of the brake system ASOAF_s_WarnBrk_StResp should be set to 1 (Ready)\n\r4) Overdeceleration protection velocity signal VSOEM_s_VDeltaLnBdryASILA should be higher than VMMP_SSHPOST_p_vASILHysSwtOn\n\r5) The target state for each each customer function is on, means:\n\rCRMSA_s___CuFuSSH_StTar is equal to VMMP_CRMSA_c___CuFuSSHStTarOn \n\rTHEN: \n\rThe following requirements should be tested.", "Type": "Pre Condition", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1250683.0", "Description": "The precondition for the following requirements is, the availability of the braking system and correct customer function requests, which means:\n\r \n\rIF AND[1,2,3,4,5]: \n\r1) The target state conditions for warning brake service is true, CRMSA_s_SSH_StTarWarnBrk is equal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for at least 2 cycles.\n\r2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is equal to VMMP_CRMSA_c_SSH_ASILAStTarOn for at least 2 cycles.\n\r3) At the beginning the availability of the brake system ASOAF_s_WarnBrk_StResp should be set to 1 (Ready)\n\r4) Overdeceleration protection velocity signal VSOEM_s_VDeltaLnBdryASILA should be higher than VMMP_SSHPOST_p_vASILHysSwtOn\n\r5) The target state for each each customer function is on, means:\n\rCRMSA_s___CuFuSSH_StTar is equal to VMMP_CRMSA_c___CuFuSSHStTarOn \n\rTHEN: \n\rThe following requirements should be tested.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
56	16647189.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Sequence for Warning Brake behavior if one customer function is requesting separately Sequence for Warning Brake behavior if one customer function is requesting separately Raw { "ID": "16647189.0", "ASIL": " ", "Text": "Sequence for Warning Brake behavior if one customer function is requesting separately", "Type": "Folder", "Status": "", "Summary": "Sequence for Warning Brake behavior if one customer function is requesting separately", "Relevant": "no", "column_12": "", "Foreign ID": "1251016.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
57	16647190.0	Functional	Released	yes	True		IF[1]: 1) Any CuFu is requesting a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brak IF[1]: 1) Any CuFu is requesting a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7) THEN[1,2,3]: 1) The output of SSH, SSHPOST_s_WarnBrk_ItReq and SSHPOST_s_WarnBrk_StResp, have to change their values accordingly (1-7). 2) The customer specific feedback signal CuFu_WarnBrkStAcv should then change to 4 (Active). 3) For the other customer functions, which are sending no warning brake request at the moment, their feedback signal CuFu_WarnBrkStAcv should remain at 1 (Available). Raw { "ID": "16647190.0", "ASIL": " ASIL B", "Text": "IF[1]: \n\r1) Any CuFu is requesting a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)\n\rTHEN[1,2,3]: \n\r1) The output of SSH, SSHPOST_s_WarnBrk_ItReq and SSHPOST_s_WarnBrk_StResp, have to change their values accordingly (1-7).\n\r2) The customer specific feedback signal CuFu_WarnBrkStAcv should then change to 4 (Active).\n\r3) For the other customer functions, which are sending no warning brake request at the moment, their feedback signal CuFu_WarnBrkStAcv should remain at 1 (Available).", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1250685.0", "Description": "IF[1]: \n\r1) Any CuFu is requesting a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)\n\rTHEN[1,2,3]: \n\r1) The output of SSH, SSHPOST_s_WarnBrk_ItReq and SSHPOST_s_WarnBrk_StResp, have to change their values accordingly (1-7).\n\r2) The customer specific feedback signal CuFu_WarnBrkStAcv should then change to 4 (Active).\n\r3) For the other customer functions, which are sending no warning brake request at the moment, their feedback signal CuFu_WarnBrkStAcv should remain at 1 (Available).", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
58	16647191.0	Functional	Released	yes	True		After the previous requirement is fulfilled (16647190) the confirmation of the brake system is needed, which means IF[1]: 1) ASO After the previous requirement is fulfilled (16647190) the confirmation of the brake system is needed, which means IF[1]: 1) ASOAF_s_WarnBrk_StResp will be set to 2 (Active). THEN: SSHPOST_s_WarnBrk_ItReq should change to 0 (NoRequest) Raw { "ID": "16647191.0", "ASIL": " QM", "Text": "After the previous requirement is fulfilled (16647190) the confirmation of the brake system is needed, which means\n\rIF[1]:\n\r1) ASOAF_s_WarnBrk_StResp will be set to 2 (Active).\n\rTHEN:\n\rSSHPOST_s_WarnBrk_ItReq should change to 0 (NoRequest)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1250687.0", "Description": "After the previous requirement is fulfilled (16647190) the confirmation of the brake system is needed, which means\n\rIF[1]:\n\r1) ASOAF_s_WarnBrk_StResp will be set to 2 (Active).\n\rTHEN:\n\rSSHPOST_s_WarnBrk_ItReq should change to 0 (NoRequest)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
59	16647192.0	Functional	Released	yes	True		After the previous requirement is fulfilled (16647191), the real brake system sends a specific recover time which means: IF[1]: After the previous requirement is fulfilled (16647191), the real brake system sends a specific recover time which means: IF[1]: 1) ASOAF_s_WarnBrk_StResp will be set to 3 (Recover). THEN: SSHPOST_s_WarnBrk_ItReq should remain at 0 (NoRequest) but SSHPOST_s_WarnBrk_StResp should change to 13 (Recover) Raw { "ID": "16647192.0", "ASIL": " QM", "Text": "After the previous requirement is fulfilled (16647191), the real brake system sends a specific recover time which means:\n\rIF[1]: \n\r1) ASOAF_s_WarnBrk_StResp will be set to 3 (Recover).\n\rTHEN:\n\rSSHPOST_s_WarnBrk_ItReq should remain at 0 (NoRequest) but\n\rSSHPOST_s_WarnBrk_StResp should change to 13 (Recover)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1250690.0", "Description": "After the previous requirement is fulfilled (16647191), the real brake system sends a specific recover time which means:\n\rIF[1]: \n\r1) ASOAF_s_WarnBrk_StResp will be set to 3 (Recover).\n\rTHEN:\n\rSSHPOST_s_WarnBrk_ItReq should remain at 0 (NoRequest) but\n\rSSHPOST_s_WarnBrk_StResp should change to 13 (Recover)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
60	16647193.0	Functional	Released	yes	True		After the recover time of the previous requirement (16647192) the brake system is again available, this means: IF[1]: 1) value After the recover time of the previous requirement (16647192) the brake system is again available, this means: IF[1]: 1) value of ASOAF_s_WarnBrk_StResp will be set to 1 (Ready). THEN: SSHPOST_s_WarnBrk_StResp should change to 12 (Ready) Raw { "ID": "16647193.0", "ASIL": " QM", "Text": "After the recover time of the previous requirement (16647192) the brake system is again available, this means:\n\rIF[1]: \n\r1) value of ASOAF_s_WarnBrk_StResp will be set to 1 (Ready).\n\rTHEN:\n\rSSHPOST_s_WarnBrk_StResp should change to 12 (Ready)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1250696.0", "Description": "After the recover time of the previous requirement (16647192) the brake system is again available, this means:\n\rIF[1]: \n\r1) value of ASOAF_s_WarnBrk_StResp will be set to 1 (Ready).\n\rTHEN:\n\rSSHPOST_s_WarnBrk_StResp should change to 12 (Ready)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
61	16647194.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Additional requests at the same time step or one after another Additional requests at the same time step or one after another Raw { "ID": "16647194.0", "ASIL": " ", "Text": "Additional requests at the same time step or one after another", "Type": "Folder", "Status": "", "Summary": "Additional requests at the same time step or one after another", "Relevant": "no", "column_12": "", "Foreign ID": "1256916.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
62	16647195.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The previously mentioned signal behavior is valid if only one customer function is requesting at a time. The two other possibiliti The previously mentioned signal behavior is valid if only one customer function is requesting at a time. The two other possibilities are, that one or more customer functions are requesting exactly at the same time or one after another during an active warning brake sequence like described in the previous requirements. see req.:16647190, 16647191, 16647192, 16647193 Raw { "ID": "16647195.0", "ASIL": " ", "Text": "The previously mentioned signal behavior is valid if only one customer function is requesting at a time. The two other possibilities are, that one or more customer functions are requesting exactly at the same time or one after another during an active warning brake sequence like described in the previous requirements.\n\rsee req.:16647190, 16647191, 16647192, 16647193", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1250700.0", "Description": "The previously mentioned signal behavior is valid if only one customer function is requesting at a time. The two other possibilities are, that one or more customer functions are requesting exactly at the same time or one after another during an active warning brake sequence like described in the previous requirements.\n\rsee req.:16647190, 16647191, 16647192, 16647193", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
63	16647196.0	Functional	Released	yes	True		If two customer functions are requesting at the same time then the higher intensity should be fed through with the sequence as de If two customer functions are requesting at the same time then the higher intensity should be fed through with the sequence as described before. Raw { "ID": "16647196.0", "ASIL": " QM", "Text": "If two customer functions are requesting at the same time\n\rthen the higher intensity should be fed through with the sequence as described before.", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1250703.0", "Description": "If two customer functions are requesting at the same time\n\rthen the higher intensity should be fed through with the sequence as described before.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
64	16647197.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	For the case that additional warning brake requests got received during another active request, this requests will be added to a q For the case that additional warning brake requests got received during another active request, this requests will be added to a queue. This queue behavior is described below. Raw { "ID": "16647197.0", "ASIL": " ", "Text": "For the case that additional warning brake requests got received during another active request, this requests will be added to a queue.\n\rThis queue behavior is described below.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1251019.0", "Description": "For the case that additional warning brake requests got received during another active request, this requests will be added to a queue.\n\rThis queue behavior is described below.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
65	16647198.0	Functional	Released	yes	True		If there is an active request, see req.16647190 for this situation, one ore more additional requests from other customer function If there is an active request, see req.16647190 for this situation, one ore more additional requests from other customer function can be received (CuFu_WarnBrkStReq between 1-7). For each additional customer warning brake request, the related customer status active CuFu_WarnBrkStAcv, should change to 3 (standby). After the recover time of the actual active request is over, then the highest intensity value of the queue should be executed with the normal sequence behavior see req.:16647190, 16647191, 16647192, 16647193 Raw { "ID": "16647198.0", "ASIL": " QM", "Text": "If there is an active request, see req.16647190 for this situation, one ore more additional requests from other customer function can be received (CuFu_WarnBrkStReq between 1-7). For each additional customer warning brake request, the related customer status active CuFu_WarnBrkStAcv, should change to 3 (standby).\n\rAfter the recover time of the actual active request is over, then the highest intensity value of the queue should be executed with the normal sequence behavior\n\rsee req.:16647190, 16647191, 16647192, 16647193", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1251021.0", "Description": "If there is an active request, see req.16647190 for this situation, one ore more additional requests from other customer function can be received (CuFu_WarnBrkStReq between 1-7). For each additional customer warning brake request, the related customer status active CuFu_WarnBrkStAcv, should change to 3 (standby).\n\rAfter the recover time of the actual active request is over, then the highest intensity value of the queue should be executed with the normal sequence behavior\n\rsee req.:16647190, 16647191, 16647192, 16647193", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
66	16647199.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Overdecceleration prevention Overdecceleration prevention Raw { "ID": "16647199.0", "ASIL": " ", "Text": "Overdecceleration prevention", "Type": "Folder", "Status": "", "Summary": "Overdecceleration prevention", "Relevant": "no", "column_12": "", "Foreign ID": "1362734.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
67	16647200.0	Functional	Released	yes	True		IF[AND(1,2] 1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff 2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7 IF[AND(1,2] 1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff 2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) THEN SSHPOST_s_WarnBrk_ItReq should change to NoRequest (0) Raw { "ID": "16647200.0", "ASIL": " ASIL C", "Text": "IF[AND(1,2]\n\r1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff\n\r2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7)\n\rTHEN\n\rSSHPOST_s_WarnBrk_ItReq should change to NoRequest (0)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1361881.0", "Description": "IF[AND(1,2]\n\r1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff\n\r2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7)\n\rTHEN\n\rSSHPOST_s_WarnBrk_ItReq should change to NoRequest (0)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
68	16647201.0	Functional	Released	yes	True		IF[AND(1,2] 1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff 2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure IF[AND(1,2] 1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff 2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) THEN SSHPOST_s_WarnBrk_StResp should change to NotAvailable (0) Raw { "ID": "16647201.0", "ASIL": " ASIL C", "Text": "IF[AND(1,2] \n\r1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff \n\r2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) \n\rTHEN \n\rSSHPOST_s_WarnBrk_StResp should change to NotAvailable (0)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1514544.0", "Description": "IF[AND(1,2] \n\r1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff \n\r2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) \n\rTHEN \n\rSSHPOST_s_WarnBrk_StResp should change to NotAvailable (0)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
69	16647202.0	Functional	Released	yes	True		IF[AND(1,2] 1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff 2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure IF[AND(1,2] 1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff 2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) THEN CuFu_WarnBrkStAcv should change to NotAvailable (2) Raw { "ID": "16647202.0", "ASIL": " ASIL C", "Text": "IF[AND(1,2] \n\r1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff \n\r2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) \n\rTHEN \n\rCuFu_WarnBrkStAcv should change to NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1514546.0", "Description": "IF[AND(1,2] \n\r1) VSOEM_s_VDeltaLnBdryASILA < VMMP_SSHPOST_p_vASILHysSwtOff \n\r2) ASOAF_s_WarnBrk_StResp is not Init (6) OR Failure (7) \n\rTHEN \n\rCuFu_WarnBrkStAcv should change to NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
70	16647203.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Targetstate Fail Targetstate Fail Raw { "ID": "16647203.0", "ASIL": " ", "Text": "Targetstate Fail", "Type": "Folder", "Status": "", "Summary": "Targetstate Fail", "Relevant": "no", "column_12": "", "Foreign ID": "1362738.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
71	16647204.0	Functional	Released	yes	True		IF[OR(1,2)]: 1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_ IF[OR(1,2)]: 1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. 2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep. THEN: IF: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure) THEN[1]: 1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0) ELSEIF[1]: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init) THEN[1]: 1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0) ELSEIF[1]: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable) THEN[1]: 1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0) Raw { "ID": "16647204.0", "ASIL": " ASIL C", "Text": "IF[OR(1,2)]:\n\r1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep.\n\r2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.\n\r \n\rTHEN: \n\rIF:\n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN[1]:\n\r1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)\n\r \n\r \n\rELSEIF[1]:\n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN[1]:\n\r1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)\n\r \n\rELSEIF[1]:\n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN[1]:\n\r1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1362736.0", "Description": "IF[OR(1,2)]:\n\r1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep.\n\r2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.\n\r \n\rTHEN: \n\rIF:\n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN[1]:\n\r1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)\n\r \n\r \n\rELSEIF[1]:\n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN[1]:\n\r1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)\n\r \n\rELSEIF[1]:\n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN[1]:\n\r1) SSHPOST_s_WarnBrk_ItReq should be NoRequest (0)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
72	16647205.0	Functional	Released	yes	True		IF[OR(1,2)]: 1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_ IF[OR(1,2)]: 1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. 2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep. THEN: IF: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure) THEN[2]: 2) SSHPOST_s_WarnBrk_StResp should be Failure (15) ELSEIF[1]: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init) THEN[2]: 2) SSHPOST_s_WarnBrk_StResp should be Init (14) ELSEIF[1]: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable) THEN[2]: 2) SSHPOST_s_WarnBrk_StResp should be NotAvailable (0) Raw { "ID": "16647205.0", "ASIL": " ASIL C", "Text": "IF[OR(1,2)]:\n\r1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. \n\r2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.\n\r \n\rTHEN: \n\rIF: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN[2]: \n\r2) SSHPOST_s_WarnBrk_StResp should be Failure (15)\n\r \n\rELSEIF[1]: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN[2]: \n\r2) SSHPOST_s_WarnBrk_StResp should be Init (14)\n\r \n\rELSEIF[1]: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN[2]: \n\r2) SSHPOST_s_WarnBrk_StResp should be NotAvailable (0)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1514551.0", "Description": "IF[OR(1,2)]:\n\r1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. \n\r2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.\n\r \n\rTHEN: \n\rIF: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN[2]: \n\r2) SSHPOST_s_WarnBrk_StResp should be Failure (15)\n\r \n\rELSEIF[1]: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN[2]: \n\r2) SSHPOST_s_WarnBrk_StResp should be Init (14)\n\r \n\rELSEIF[1]: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN[2]: \n\r2) SSHPOST_s_WarnBrk_StResp should be NotAvailable (0)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
73	16647206.0	Functional	Released	yes	True		IF[OR(1,2)]: 1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA IF[OR(1,2)]: 1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. 2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep. THEN: IF: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure) THEN[3]: 3) Each customer status active signal CuFu_WarnBrkStAcv should be Failure (7) ELSEIF[1]: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init) THEN[3]: 3) Each customer status active signal CuFu_WarnBrkStAcv should be Init (6) ELSEIF[1]: 1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable) THEN [3]: 3) Each customer status active signal CuFu_WarnBrkStAcv should be NotAvailable (2) Raw { "ID": "16647206.0", "ASIL": " ASIL C", "Text": "IF[OR(1,2)]: \n\r1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. \n\r2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.\n\r \n\rTHEN: \n\rIF: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN[3]: \n\r3) Each customer status active signal CuFu_WarnBrkStAcv should be Failure (7)\n\r \n\rELSEIF[1]: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN[3]: \n\r3) Each customer status active signal CuFu_WarnBrkStAcv should be Init (6)\n\r \n\rELSEIF[1]: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN [3]: \n\r3) Each customer status active signal CuFu_WarnBrkStAcv should be NotAvailable (2)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1514553.0", "Description": "IF[OR(1,2)]: \n\r1) The target state condition for warning brake service is false, CRMSA_s_SSH_StTarWarnBrk is unequal to VMMP_CRMSA_c_SSH_WarnBrkStTarOn for the actual or the previous timestep. \n\r2) The target state condition for vASIL decceleration, CRMSA_s_SSH_StTarASILA is unequal to VMMP_CRMSA_c_SSH_ASILAStTarOn for the actual or the previous timestep.\n\r \n\rTHEN: \n\rIF: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnFail (Failure)\n\r \n\rTHEN[3]: \n\r3) Each customer status active signal CuFu_WarnBrkStAcv should be Failure (7)\n\r \n\rELSEIF[1]: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnIni (Init)\n\r \n\rTHEN[3]: \n\r3) Each customer status active signal CuFu_WarnBrkStAcv should be Init (6)\n\r \n\rELSEIF[1]: \n\r1) The maximum of CRMSA_s_SSH_StDgrdRsnWarnBrk and CRMSA_s_SSH_StDgrdRsnASILA, is equal to VMMP_CRM_c_StDgrdRsnNone (NotAvailable)\n\r \n\rTHEN [3]: \n\r3) Each customer status active signal CuFu_WarnBrkStAcv should be NotAvailable (2)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
74	16647207.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	CuFu Targetstate Fail CuFu Targetstate Fail Raw { "ID": "16647207.0", "ASIL": " ", "Text": "CuFu Targetstate Fail", "Type": "Folder", "Status": "", "Summary": "CuFu Targetstate Fail", "Relevant": "no", "column_12": "", "Foreign ID": "1362740.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
75	16647208.0	Functional	Released	yes	True		IF AND[1,2]: 1) A target state for a customer function switches to off, means: CRMSA_s___CuFuSSH_StTar is unequal to VMMP_CRMSA_ IF AND[1,2]: 1) A target state for a customer function switches to off, means: CRMSA_s___CuFuSSH_StTar is unequal to VMMP_CRMSA_c___CuFuSSHStTarOn 2) This mentioned customer function also requests a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7) THEN AND[1]: 1) This customer function status active signal CuFu_WarnBrkStAcv should be Failure (7) Raw { "ID": "16647208.0", "ASIL": " ASIL C", "Text": "IF AND[1,2]:\n\r1) A target state for a customer function switches to off, means:\n\rCRMSA_s___CuFuSSH_StTar is unequal to VMMP_CRMSA_c___CuFuSSHStTarOn\n\r2) This mentioned customer function also requests a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)\n\r \n\rTHEN AND[1]:\n\r1) This customer function status active signal CuFu_WarnBrkStAcv should be Failure (7)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1362742.0", "Description": "IF AND[1,2]:\n\r1) A target state for a customer function switches to off, means:\n\rCRMSA_s___CuFuSSH_StTar is unequal to VMMP_CRMSA_c___CuFuSSHStTarOn\n\r2) This mentioned customer function also requests a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)\n\r \n\rTHEN AND[1]:\n\r1) This customer function status active signal CuFu_WarnBrkStAcv should be Failure (7)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
76	16647209.0	Functional	Released	yes	True		IF AND[1,2]: 1) A target state for a customer function switches to off, means: CRMSA_s_CuFuSSH_StTar is unequal to VMMP_CRMSA_ IF AND[1,2]: 1) A target state for a customer function switches to off, means: CRMSA_s_CuFuSSH_StTar is unequal to VMMP_CRMSA_c_CuFuSSHStTarOn 2) This mentioned customer function also requests a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7) THEN AND[2]: 2) This customer functions warning brake request should never lead to a corresponding SSHPOST_s_WarnBrk_ItReq Raw { "ID": "16647209.0", "ASIL": " ASIL C", "Text": "IF AND[1,2]: \n\r1) A target state for a customer function switches to off, means: \n\rCRMSA_s_CuFuSSH_StTar is unequal to VMMP_CRMSA_c_CuFuSSHStTarOn \n\r2) This mentioned customer function also requests a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)\n\r \n\rTHEN AND[2]: \n\r2) This customer functions warning brake request should never lead to a corresponding SSHPOST_s_WarnBrk_ItReq", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1514560.0", "Description": "IF AND[1,2]: \n\r1) A target state for a customer function switches to off, means: \n\rCRMSA_s_CuFuSSH_StTar is unequal to VMMP_CRMSA_c_CuFuSSHStTarOn \n\r2) This mentioned customer function also requests a warning brake, which means CuFu_WarnBrkStReq is changing from NoRequest (0) to a warning brake request (1-7)\n\r \n\rTHEN AND[2]: \n\r2) This customer functions warning brake request should never lead to a corresponding SSHPOST_s_WarnBrk_ItReq", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
77	16647210.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Special CuFu Degradations Special CuFu Degradations Raw { "ID": "16647210.0", "ASIL": " ", "Text": "Special CuFu Degradations", "Type": "Folder", "Status": "", "Summary": "Special CuFu Degradations", "Relevant": "no", "column_12": "", "Foreign ID": "1386493.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
78	16647211.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	A customer function can have some special degradation reasons. For example the rear control traffic alert function should not be A customer function can have some special degradation reasons. For example the rear control traffic alert function should not be available at vehicle velocities > 15km/h Raw { "ID": "16647211.0", "ASIL": " ", "Text": "A customer function can have some special degradation reasons. \n\rFor example the rear control traffic alert function should not be available at vehicle velocities > 15km/h", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1386497.0", "Description": "A customer function can have some special degradation reasons. \n\rFor example the rear control traffic alert function should not be available at vehicle velocities > 15km/h", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
79	16647212.0	Functional	Released	yes	True		IF: 1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded. THEN [1]: 1) The RCTA customer f IF: 1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded. THEN [1]: 1) The RCTA customer function status active signal SSHPOST_s_RCTAWarnBrk_StAcv should be NotAvailable (2) ELSE [1]: 1) The standard procedure, as described in 16647189, should be executed Raw { "ID": "16647212.0", "ASIL": " ASIL C", "Text": "IF:\n\r1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded.\n\r \n\rTHEN [1]:\n\r1) The RCTA customer function status active signal SSHPOST_s_RCTAWarnBrk_StAcv should be NotAvailable (2)\n\r \n\rELSE [1]:\n\r1) The standard procedure, as described in 16647189, should be executed", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1386495.0", "Description": "IF:\n\r1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded.\n\r \n\rTHEN [1]:\n\r1) The RCTA customer function status active signal SSHPOST_s_RCTAWarnBrk_StAcv should be NotAvailable (2)\n\r \n\rELSE [1]:\n\r1) The standard procedure, as described in 16647189, should be executed", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
80	16647213.0	Functional	Released	yes	True		IF: 1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded. THEN [2]: 2) A warning brake req IF: 1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded. THEN [2]: 2) A warning brake request of RCTA, the CFBPCR_s_RCTAWarnBrk_ItReq should not be NoRequest (0) to SSHPOST_s_WarnBrk_ItReq ELSE [1]: 1) The standard procedure, as described in 16647189, should be executed Raw { "ID": "16647213.0", "ASIL": " ASIL C", "Text": "IF:\n\r1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded.\n\r \n\rTHEN [2]:\n\r2) A warning brake request of RCTA, the CFBPCR_s_RCTAWarnBrk_ItReq should not be NoRequest (0) to SSHPOST_s_WarnBrk_ItReq\n\r \n\rELSE [1]:\n\r1) The standard procedure, as described in 16647189, should be executed", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1514562.0", "Description": "IF:\n\r1) The flag VSOEM_s_FlgExcThVLim is one, which means a certain velocity limit is exceeded.\n\r \n\rTHEN [2]:\n\r2) A warning brake request of RCTA, the CFBPCR_s_RCTAWarnBrk_ItReq should not be NoRequest (0) to SSHPOST_s_WarnBrk_ItReq\n\r \n\rELSE [1]:\n\r1) The standard procedure, as described in 16647189, should be executed", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
81	16647214.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Additional Services Additional Services Raw { "ID": "16647214.0", "ASIL": " ", "Text": "Additional Services", "Type": "Folder", "Status": "", "Summary": "Additional Services", "Relevant": "no", "column_12": "", "Foreign ID": "1314024.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
82	16647215.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Vehicle Network State Manager Vehicle Network State Manager Raw { "ID": "16647215.0", "ASIL": " ", "Text": "Vehicle Network State Manager", "Type": "Folder", "Status": "", "Summary": "Vehicle Network State Manager", "Relevant": "no", "column_12": "", "Foreign ID": "1314018.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
83	16647216.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The Vehicle Network State Manager (VNSM) is responsible for waking up other ECUs or preventing them to shut down. Each requesting The Vehicle Network State Manager (VNSM) is responsible for waking up other ECUs or preventing them to shut down. Each requesting function could be mapped to each of the three User-IDs. Therefore each function has three parameters, which decide the routing to the output User-IDs. Routing VMMP_SSHPOST_p_flg*SwtOnUsrId1 unequal to one --> VMM_s_FlgVNSMUsrId1 will be set (1) VMMP_SSHPOST_p_flgSwtOnUsrId2 unequal to one --> VMM_s_FlgVNSMUsrId2 will be set (1) VMMP_SSHPOST_p_flgSwtOnUsrId3 --> VMM_s_FlgVNSMUsrId3 will be set (1) Raw { "ID": "16647216.0", "ASIL": " ", "Text": "The Vehicle Network State Manager (VNSM) is responsible for waking up other ECUs or preventing them to shut down.\n\rEach requesting function could be mapped to each of the three User-IDs.\n\rTherefore each function has three parameters, which decide the routing to the output User-IDs.\n\rRouting\n\rVMMP_SSHPOST_p_flgSwtOnUsrId1 unequal to one\n\r--> VMM_s_FlgVNSMUsrId1 will be set (1)\n\rVMMP_SSHPOST_p_flgSwtOnUsrId2 unequal to one\n\r--> VMM_s_FlgVNSMUsrId2 will be set (1)\n\rVMMP_SSHPOST_p_flgSwtOnUsrId3\n\r--> VMM_s_FlgVNSMUsrId3 will be set (1)", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1314020.0", "Description": "The Vehicle Network State Manager (VNSM) is responsible for waking up other ECUs or preventing them to shut down.\n\rEach requesting function could be mapped to each of the three User-IDs.\n\rTherefore each function has three parameters, which decide the routing to the output User-IDs.\n\rRouting\n\rVMMP_SSHPOST_p_flgSwtOnUsrId1 unequal to one\n\r--> VMM_s_FlgVNSMUsrId1 will be set (1)\n\rVMMP_SSHPOST_p_flgSwtOnUsrId2 unequal to one\n\r--> VMM_s_FlgVNSMUsrId2 will be set (1)\n\rVMMP_SSHPOST_p_flg**SwtOnUsrId3\n\r--> VMM_s_FlgVNSMUsrId3 will be set (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
84	16647217.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	In The following requirements the asterisk will be used for 1,2,3 In The following requirements the asterisk will be used for 1,2,3 Raw { "ID": "16647217.0", "ASIL": " ", "Text": "In The following requirements the asterisk will be used for 1,2,3", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1314074.0", "Description": "In The following requirements the asterisk will be used for 1,2,3", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
85	16647218.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	VNSM Main Switch Off VNSM Main Switch Off Raw { "ID": "16647218.0", "ASIL": " ", "Text": "VNSM Main Switch Off", "Type": "Folder", "Status": "", "Summary": "VNSM Main Switch Off", "Relevant": "no", "column_12": "", "Foreign ID": "1339236.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
86	16647219.0	Functional	Released	yes	True		IF[1]: 1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is zero THEN: the output signals VMM_s_FlgVNSMUsrId* should equal zero. IF[1]: 1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is zero THEN: the output signals VMM_s_FlgVNSMUsrId* should equal zero. Raw { "ID": "16647219.0", "ASIL": " QM", "Text": "IF[1]:\n\r1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is zero\n\rTHEN:\n\rthe output signals VMM_s_FlgVNSMUsrId* should equal zero.", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1314022.0", "Description": "IF[1]:\n\r1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is zero\n\rTHEN:\n\rthe output signals VMM_s_FlgVNSMUsrId* should equal zero.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
87	16647220.0	Functional	Released	yes	True		IF[1]: 1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is unequal to zero THEN: IF[1]: 1) ARBLGLSCA_s_LgtLimA_FlgWkReq is false 2) IF[1]: 1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is unequal to zero THEN: IF[1]: 1) ARBLGLSCA_s_LgtLimA_FlgWkReq is false 2) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is false 3) ARBPKCSC_s_PrkLckCtl_FlgWkReq is false 4) ARBLLCSC_s_LgtCtl_StAcv is false 5) ARBLLCSC_s_LatCtl_StAcv is false 6) ARBLGLSCA_s_LgtLimA_FlgAcv is false 7) HMSOP_s_StPrkBrkAcv is false 8) HMSOP_s_StPrkPosnAcv is false 9) HMSOP_s_StExtDispTrigEPB is false 10) FSS_s_StEnaReq is false THEN: All VMM_s_FlgVNSMUsrId* have to be false ELSE: the following requirements should be tested: Raw { "ID": "16647220.0", "ASIL": " QM", "Text": "IF[1]:\n\r1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is unequal to zero\n\rTHEN:\n\rIF[1]:\n\r1) ARBLGLSCA_s_LgtLimA_FlgWkReq is false\n\r2) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is false\n\r3) ARBPKCSC_s_PrkLckCtl_FlgWkReq is false\n\r4) ARBLLCSC_s_LgtCtl_StAcv is false\n\r5) ARBLLCSC_s_LatCtl_StAcv is false\n\r6) ARBLGLSCA_s_LgtLimA_FlgAcv is false\n\r7) HMSOP_s_StPrkBrkAcv is false\n\r8) HMSOP_s_StPrkPosnAcv is false\n\r9) HMSOP_s_StExtDispTrigEPB is false\n\r10) FSS_s_StEnaReq is false\n\rTHEN:\n\rAll VMM_s_FlgVNSMUsrId* have to be false\n\rELSE:\n\rthe following requirements should be tested:", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1314052.0", "Description": "IF[1]:\n\r1) the parameter VMMP_SSHPOST_p_VNSMSwtOn is unequal to zero\n\rTHEN:\n\rIF[1]:\n\r1) ARBLGLSCA_s_LgtLimA_FlgWkReq is false\n\r2) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is false\n\r3) ARBPKCSC_s_PrkLckCtl_FlgWkReq is false\n\r4) ARBLLCSC_s_LgtCtl_StAcv is false\n\r5) ARBLLCSC_s_LatCtl_StAcv is false\n\r6) ARBLGLSCA_s_LgtLimA_FlgAcv is false\n\r7) HMSOP_s_StPrkBrkAcv is false\n\r8) HMSOP_s_StPrkPosnAcv is false\n\r9) HMSOP_s_StExtDispTrigEPB is false\n\r10) FSS_s_StEnaReq is false\n\rTHEN:\n\rAll VMM_s_FlgVNSMUsrId* have to be false\n\rELSE:\n\rthe following requirements should be tested:", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
88	16647221.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	VNSM User ID Supervision VNSM User ID Supervision Raw { "ID": "16647221.0", "ASIL": " ", "Text": "VNSM User ID Supervision", "Type": "Folder", "Status": "", "Summary": "VNSM User ID Supervision", "Relevant": "no", "column_12": "", "Foreign ID": "1339254.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
89	16647222.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	SSHPOST supervises each user id with a specific time. This means if there is a continious request, it should not be outputted long SSHPOST supervises each user id with a specific time. This means if there is a continious request, it should not be outputted longer than a specific time. Raw { "ID": "16647222.0", "ASIL": " ", "Text": "SSHPOST supervises each user id with a specific time. This means if there is a continious request, it should not be outputted longer than a specific time.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1339259.0", "Description": "SSHPOST supervises each user id with a specific time. This means if there is a continious request, it should not be outputted longer than a specific time.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
90	16647223.0	Functional	Released	yes	True		The signal VMM_s_FlgVNSMUsrId1 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId1VMMP_c_TiSmpl) sec The signal VMM_s_FlgVNSMUsrId1 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId1VMMP_c_TiSmpl) seconds Raw { "ID": "16647223.0", "ASIL": " QM", "Text": "The signal VMM_s_FlgVNSMUsrId1 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId1VMMP_c_TiSmpl) seconds", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1339271.0", "Description": "The signal VMM_s_FlgVNSMUsrId1 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId1VMMP_c_TiSmpl) seconds", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
91	16647224.0	Functional	Released	yes	True		The signal VMM_s_FlgVNSMUsrId2 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId2VMMP_c_TiSmpl) sec The signal VMM_s_FlgVNSMUsrId2 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId2VMMP_c_TiSmpl) seconds Raw { "ID": "16647224.0", "ASIL": " QM", "Text": "The signal VMM_s_FlgVNSMUsrId2 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId2VMMP_c_TiSmpl) seconds", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1339273.0", "Description": "The signal VMM_s_FlgVNSMUsrId2 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId2VMMP_c_TiSmpl) seconds", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
92	16647225.0	Functional	Released	yes	True		The signal VMM_s_FlgVNSMUsrId3 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId3VMMP_c_TiSmpl) sec The signal VMM_s_FlgVNSMUsrId3 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId3VMMP_c_TiSmpl) seconds Raw { "ID": "16647225.0", "ASIL": " QM", "Text": "The signal VMM_s_FlgVNSMUsrId3 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId3VMMP_c_TiSmpl) seconds", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1339277.0", "Description": "The signal VMM_s_FlgVNSMUsrId3 should never be continiously >0 for more than (VMMP_SSHPOST_p_tMaxExTiVNSMUsrId3VMMP_c_TiSmpl) seconds", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
93	16647226.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	VNSM User ID Minimum Activation Time VNSM User ID Minimum Activation Time Raw { "ID": "16647226.0", "ASIL": " ", "Text": "VNSM User ID Minimum Activation Time", "Type": "Folder", "Status": "", "Summary": "VNSM User ID Minimum Activation Time", "Relevant": "no", "column_12": "", "Foreign ID": "1408579.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
94	16647227.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	In order to get the wakeup request for different cluster on the wakeup CAN a VNSM event has to held for a certain amount of time. In order to get the wakeup request for different cluster on the wakeup CAN a VNSM event has to held for a certain amount of time. Raw { "ID": "16647227.0", "ASIL": " ", "Text": "In order to get the wakeup request for different cluster on the wakeup CAN a VNSM event has to held for a certain amount of time.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1408581.0", "Description": "In order to get the wakeup request for different cluster on the wakeup CAN a VNSM event has to held for a certain amount of time.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
95	16647228.0	Functional	Released	yes	True		If an VNSM UserID Event occurs means: IF: 1) Any output VMM_s_FlgVNSMUsrId* is set to (1) see (16647230, 16647231, 16647232, 16 If an VNSM UserID Event occurs means: IF: 1) Any output VMM_s_FlgVNSMUsrId* is set to (1) see (16647230, 16647231, 16647232, 16647236, 16647237, 16647238, 16647240, 16647242, 16647241) THEN: 1) A VNSM UserID request VMM_s_FlgVNSMUsrId* should be held at least for VMMP_SSHPOST_p_tMinExTiVNSMUsrIds time samples. Raw { "ID": "16647228.0", "ASIL": " QM", "Text": "If an VNSM UserID Event occurs means:\n\r \n\rIF:\n\r1) Any output VMM_s_FlgVNSMUsrId* is set to (1)\n\rsee (16647230, 16647231, 16647232, 16647236, 16647237, 16647238, 16647240, 16647242, 16647241)\n\rTHEN:\n\r1) A VNSM UserID request VMM_s_FlgVNSMUsrId* should be held at least for VMMP_SSHPOST_p_tMinExTiVNSMUsrIds time samples.", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1408583.0", "Description": "If an VNSM UserID Event occurs means:\n\r \n\rIF:\n\r1) Any output VMM_s_FlgVNSMUsrId* is set to (1)\n\rsee (16647230, 16647231, 16647232, 16647236, 16647237, 16647238, 16647240, 16647242, 16647241)\n\rTHEN:\n\r1) A VNSM UserID request VMM_s_FlgVNSMUsrId* should be held at least for VMMP_SSHPOST_p_tMinExTiVNSMUsrIds time samples.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
96	16647229.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	VNSM Wakeup Requests VNSM Wakeup Requests Raw { "ID": "16647229.0", "ASIL": " ", "Text": "VNSM Wakeup Requests", "Type": "Folder", "Status": "", "Summary": "VNSM Wakeup Requests", "Relevant": "no", "column_12": "", "Foreign ID": "1339228.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
97	16647230.0	Functional	Released	yes	True		IF[AND(1,2)]: 1) ARBLGLSCA_s_LgtLimA_FlgWkReq is unequal to zero THEN: depending on the the parameters: VMMP_SSHPOST_p_flgAR IF[AND(1,2)]: 1) ARBLGLSCA_s_LgtLimA_FlgWkReq is unequal to zero THEN: depending on the the parameters: VMMP_SSHPOST_p_flgARBWkLgtLimASwtOnUsrId* the outputs VMM_s_FlgVNSMUsrId* should be set (1) Raw { "ID": "16647230.0", "ASIL": " QM", "Text": "IF[AND(1,2)]: \n\r1) ARBLGLSCA_s_LgtLimA_FlgWkReq is unequal to zero\n\rTHEN: \n\rdepending on the the parameters:\n\rVMMP_SSHPOST_p_flgARBWkLgtLimASwtOnUsrId\n\rthe outputs\n\rVMM_s_FlgVNSMUsrId should be set (1)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1314054.0", "Description": "IF[AND(1,2)]: \n\r1) ARBLGLSCA_s_LgtLimA_FlgWkReq is unequal to zero\n\rTHEN: \n\rdepending on the the parameters:\n\rVMMP_SSHPOST_p_flgARBWkLgtLimASwtOnUsrId\n\rthe outputs\n\rVMM_s_FlgVNSMUsrId should be set (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
98	16647231.0	Functional	Released	yes	True		IF[AND(1,2)]: 1) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is unequal to zero THEN: depending on the the parameters: VMMP_SSHPOST_p_flgA IF[AND(1,2)]: 1) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is unequal to zero THEN: depending on the the parameters: VMMP_SSHPOST_p_flgARBWkPrkAlyCtlSwtOnUsrId* the outputs VMM_s_FlgVNSMUsrId* should be set (1) Raw { "ID": "16647231.0", "ASIL": " QM", "Text": "IF[AND(1,2)]: \n\r1) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is unequal to zero\n\rTHEN: \n\rdepending on the the parameters:\n\rVMMP_SSHPOST_p_flgARBWkPrkAlyCtlSwtOnUsrId\n\rthe outputs\n\rVMM_s_FlgVNSMUsrId should be set (1)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1314056.0", "Description": "IF[AND(1,2)]: \n\r1) ARBPKCSC_s_PrkAlyCtl_FlgWkReq is unequal to zero\n\rTHEN: \n\rdepending on the the parameters:\n\rVMMP_SSHPOST_p_flgARBWkPrkAlyCtlSwtOnUsrId\n\rthe outputs\n\rVMM_s_FlgVNSMUsrId should be set (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
99	16647232.0	Functional	Released	yes	True		IF[AND(1,2)]: 1) ARBPKCSC_s_PrkLckCtl_FlgWkReq is unequal to zero THEN: depending on the the parameters: VMMP_SSHPOST_p_flgA IF[AND(1,2)]: 1) ARBPKCSC_s_PrkLckCtl_FlgWkReq is unequal to zero THEN: depending on the the parameters: VMMP_SSHPOST_p_flgARBWkPrkLckCtlSwtOnUsrId* the outputs VMM_s_FlgVNSMUsrId* should be set (1) Raw { "ID": "16647232.0", "ASIL": " QM", "Text": "IF[AND(1,2)]: \n\r1) ARBPKCSC_s_PrkLckCtl_FlgWkReq is unequal to zero\n\rTHEN: \n\rdepending on the the parameters:\n\rVMMP_SSHPOST_p_flgARBWkPrkLckCtlSwtOnUsrId\n\rthe outputs\n\rVMM_s_FlgVNSMUsrId should be set (1)", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1314058.0", "Description": "IF[AND(1,2)]: \n\r1) ARBPKCSC_s_PrkLckCtl_FlgWkReq is unequal to zero\n\rTHEN: \n\rdepending on the the parameters:\n\rVMMP_SSHPOST_p_flgARBWkPrkLckCtlSwtOnUsrId\n\rthe outputs\n\rVMM_s_FlgVNSMUsrId should be set (1)", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
100	16647233.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	VNSM Deceleration Interface Wakeup VNSM Deceleration Interface Wakeup Raw { "ID": "16647233.0", "ASIL": " ", "Text": "VNSM Deceleration Interface Wakeup", "Type": "Folder", "Status": "", "Summary": "VNSM Deceleration Interface Wakeup", "Relevant": "no", "column_12": "", "Foreign ID": "1408574.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
101	16647234.0	Functional	Released	yes	True		IF[AND(1,2)]: 1) VMM_s_FlgVNSMUsrId* is set (1) according to OR (16647230, 16647231, 16647232) 2) VMMP_SSHPOST_p_flgSwtOnWkUpStE IF[AND(1,2)]: 1) VMM_s_FlgVNSMUsrId* is set (1) according to OR (16647230, 16647231, 16647232) 2) VMMP_SSHPOST_p_flgSwtOnWkUpStEnaReq is one THEN: SSHPOST_s_TqWhlDece_StEnaReq should be one ELSE: SSHPOST_s_TqWhlDece_StEnaReq should be zero Raw { "ID": "16647234.0", "ASIL": " QM", "Text": "IF[AND(1,2)]:\n\r1) VMM_s_FlgVNSMUsrId* is set (1) according to OR (16647230, 16647231, 16647232)\n\r2) VMMP_SSHPOST_p_flgSwtOnWkUpStEnaReq is one\n\r \n\rTHEN: \n\rSSHPOST_s_TqWhlDece_StEnaReq should be one\n\rELSE: \n\rSSHPOST_s_TqWhlDece_StEnaReq should be zero", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1408572.0", "Description": "IF[AND(1,2)]:\n\r1) VMM_s_FlgVNSMUsrId* is set (1) according to OR (16647230, 16647231, 16647232)\n\r2) VMMP_SSHPOST_p_flgSwtOnWkUpStEnaReq is one\n\r \n\rTHEN: \n\rSSHPOST_s_TqWhlDece_StEnaReq should be one\n\rELSE: \n\rSSHPOST_s_TqWhlDece_StEnaReq should be zero", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }

Source files

Mapping profiles

Import history

VME-PROD-VehicleMotionManagement - VMMP_SRVPOST_SSHPOST.xlsx · source records

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw