Source files

Mapping profiles

Import history

File	Kind	Rows	Checksum
VME-PROD-VehicleMotionManagement - VMMP_ARB_ARBLACSC.xlsx	requirement	96	6c313a49d7cf
VME-PROD-VehicleMotionManagement - VMMP.xlsx	requirement	297	dcdcc7aa02b4

VME-PROD-VehicleMotionManagement - VMMP_CRM_CRMEH.xlsx · source records


Short description
The Module CRMEH (Central Release Management Event Handler) is a submodule of CRM.

The CRM sub-function "EventHandler" collects the diagnostic events that are generated within the VMM sub-functions.and communicates with the diagnostic interface of the HCP1 in order to set or reset event memory entries.
Interface description
The valid version of the signal and parameter files for the relevant SWRS are:


The valid version of the signal and parameter files for test basis to be found in CG, which is to be tested
Presetting/Framework/Definitions
Traceability
SWRS to Testcase:

The latest revision of the test specification document is valid for the tracability SWRS to Testcase
SWRS to Codebeamer: 

CodeBeamer-IDs are mentioned in the SWRS atrribute DOORS IDs.

The latest baseline of the specification document (CodeBeamer) is valid for the traceability SWRS to CodeBeamer.
Toolchain
The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain.
For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used.
Tolerances
For the comparison of output signals to the expected reactions or by back-to-back tests (MiL-PiL) following tolerances are accepted for deviations:
Bool: No deviation allowed
UInt, Int: No deviation allowed
Float: 0.1% related to the permissible value range of the signal
It must be ensured that an output reaction occurs due to an event at the input within the same calculation step.
Bit numbering
The bit numbering takes place as zero-based numbering method. 

This means, 1 Byte is equal to Bit 0...7.
Requirements
For all requirements (except "examples"), an excel table with the name "VMM_CRM_FunctionMatrix.xlsx" is provided (see Modul SWRS_VMMP chapter "Central Release Management") 

It shall be used for the test implementations.
For all examples, an excel table with the name "VMM_CRM_FunctionMatrix_Example.xlsx" is provided  ), which is used as the data basis.

The examples don't refer to the real excel table so the examples remain valid even when the real excel table is changed.

The general structure of the example excel table and the real excel table are of course the same.
Definition and naming conventions
The following naming conventions will be used:

* Sheet refers to one of the sheets of the excel table, i.e. the sheets "dtc", "reaction" and "statemachine". 

* Row, column and cell are used with regard to the excel table 

* Target state and degradation reason are used with regard to the module. These are outputs of the CRM modules.
Active row 

A row of a sheet is called active row, if the input of the module with the name given by the column "signal name" has the value given by the column "signal constant"

Example:

Let's assume the following inputs to the module:

* ASOAF_s_DiagDrvPosn_StEveReq = VMMP_c_DiagEveSigIni

* ASOAF_s_EPBActrCtl_StAvl = VMMP_ASOAF_c_EPBActrCtl_StAvlReleaseOnly

In this example the only active row of the sheet "dtc" is row 7.

The active rows of sheet "reaction" are row 4 and row 11.
Output calculation
Empty cell doesn't have any impact on the output.
Each column col - starting with column E - of the sheet "dtc" describes two outputs of the module - one DTC flag and one enable flag.
The name of the output is the name of the column col prefixed by the literal string "VMM_s_" and the name of the outputEnable is the name of the column col prefixed by the literal string "VMM_s_Ena".

Example:

The outputs for the example would be "VMM_s_DTCEPBActrCtlStSigFail", "VMM_s_DTCEPBActrCtlStSigNotVld", "VMM_s_DTCEPBAlyRlsStActrFail", "VMM_s_DTCDrvPosnStSigFail", "VMM_s_DTCDrvPosnStSigNotVld" and the outputEnable would be "VMM_s_EnaDTCEPBActrCtlStSigFail", "VMM_s_EnaDTCEPBActrCtlStSigNotVld", "VMM_s_EnaDTCEPBAlyRlsStActrFail", "VMM_s_EnaDTCDrvPosnStSigFail", "VMM_s_EnaDTCDrvPosnStSigNotVld" on the other side.
The name of the output is the name of the column col prefixed by the literal string "CRMEH_s_" and the name of the outputEnable is the name of the column col prefixed by the literal string "CRMEH_s_Ena".

Example:

The outputs for the example would be "CRMEH_s_DTCEPBActrCtlStSigFail", "CRMEH_s_DTCEPBActrCtlStSigNotVld", "CRMEH_s_DTCEPBAlyRlsStActrFail", "CRMEH_s_DTCDrvPosnStSigFail", "CRMEH_s_DTCDrvPosnStSigNotVld" and the outputEnable would be "CRMEH_s_EnaDTCEPBActrCtlStSigFail", "CRMEH_s_EnaDTCEPBActrCtlStSigNotVld", "CRMEH_s_EnaDTCEPBAlyRlsStActrFail", "CRMEH_s_EnaDTCDrvPosnStSigFail", "CRMEH_s_EnaDTCDrvPosnStSigNotVld" on the other side.
Information for tester:

To increase code coverage all elements of the following parameter VMMP_CRMEH_p1_DiagMtrxFlg_XXX shall be set to 255, which means that all bits are set. XXX is the "name of the output" - see also 3.4.2

To get the correct output of the test coverage, it shall be assumed that the cells with the value 0 of the column col defined in 3.4.1 - 3.4.2 are changed from 0 to 1.
IF[AND(1,2)]

1) All diagnose boundary conditions are fulfilled:

Diag_s_BoundaryCdn_VoltRange = 1 & Diag_s_BoundaryCdn_Clmp15Acv = 1 & Diag_s_BoundaryCdn_DiagDlyEt = 1 & Diag_s_BoundaryCdn_DiagStartFr = 1 & Diag_s_BoundaryCdn_FrSyncPres = 1

2) Diag_s_DTCFlgRstrt != 1

THEN:

EnableDTCFlg is "true"

ELSE:

EnableDTCFlg is "false"
For each column:

IF [AND(1,2,3)]:

1) At least one cell of the column col is marked with a "1" and that cell is on an active row

2) EnableDTCFlg is "true"

3) VMMP_CRMEH_p_DiagFlg_SwtDeac = 0

THEN:

Output is "true"

ELSE:

Output = 0*VMMP_CRMEH_p1_DiagFlgDft
Example:

Let's assume the following inputs to the module:

* ASOAF_s_EPBAlyRls_StReqResp = VMMP_ASOAF_c_EPBAlyRls_StReqRespFail

* ASOAF_s_DiagDrvPosn_StEveReq = VMMP_c_DiagEveSigNotVld

* ASOAF_s_DiagEPBActrCtl_StEveReq = VMMP_c_DiagEveSigFail

* So the active rows in this example are row 2, 5 and 8.

* Column E (DTCEPBActrCtl_StSigFail) has a "1" in the cells intersecting with rows 2, 8 and 10. Row 2 and 8 are active rows, so the output CRMEH_s_DTCEPBActrCtl_StSigFail for this column would be "true".

* Column H (DTCDrvPosn_StSigFail) has a "1" in the cells intersecting with rows 4 and 6. But none of these are active rows, so the output CRMEH_s_DTCDrvPosn_StSigFail for this column would be "false".
IF [AND(1, 2, 3)]

1) Output changed, i.e. Output(k-1) != Output(k)

2) Diag_s_DTCFlgRstrt = 0

3) All diagnose boundary conditions are fulfilled

THEN

OutputEnable = "true"
IF [AND(1, 2, 3)]

1) Output not changed, i.e. Output(k-1) == Output(k)

2) Diag_s_DTCFlgRstrt = 0

3) All diagnose boundary conditions are fulfilled

THEN

OutputEnable = "false"
IF [AND(1, 2)]

1) Diag_s_DTCFlgRstrt = 1

2) All diagnose boundary conditions are fulfilled

THEN

OutputEnable = "true"
IF [1]

1) All diagnose boundary conditions are not fulfilled

THEN

OutputEnable = "false"
IF [XOR(1,2)]:

1) Output(k)

2) Output(k-1) + Output(k)

THEN:

OutEnable1 = 1

ELSE:

THEN:

OutEnable1 = 0

 8
IF [OR(1,2)]:

1) OutEnable1 = 1

2) Diag_s_DTCFlgRstrt = 1

THEN:

OutEnable2 = 1

ELSE:

THEN:

OutEnable2 = 0

 8
IF [AND(1,2)]:

1) OutEnable2 = 1

2) diagnose boundary conditions are not fullfilled

THEN:

OutEnable3 = 1

ELSE:

THEN:

OutEnable3 = 0

 8
IF [AND(OR(1, 2), 3)]:

1) OutEnable3(k-1) = 1

2) OutEnable2 = 1

3) All diagnose boundary conditions are fulfilled

THEN:

OutputEnable = "true"

ELSE

OutputEnable = 0*VMMP_CRMEH_p_SwDiagFlg

Row	ID	Type	Status	Relevant	Candidate	Reason	Normalized text
2	16661868.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Short description Short description Raw { "ID": "16661868.0", "ASIL": " ", "Text": "Short description", "Type": "Folder", "Status": "", "Summary": "Short description", "Relevant": "no", "column_12": "", "Foreign ID": "1123326.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
3	16661869.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The Module CRMEH (Central Release Management Event Handler) is a submodule of CRM. The CRM sub-function "EventHandler" collects t The Module CRMEH (Central Release Management Event Handler) is a submodule of CRM. The CRM sub-function "EventHandler" collects the diagnostic events that are generated within the VMM sub-functions.and communicates with the diagnostic interface of the HCP1 in order to set or reset event memory entries. Raw { "ID": "16661869.0", "ASIL": " ", "Text": "The Module CRMEH (Central Release Management Event Handler) is a submodule of CRM.\n\rThe CRM sub-function \"EventHandler\" collects the diagnostic events that are generated within the VMM sub-functions.and communicates with the diagnostic interface of the HCP1 in order to set or reset event memory entries.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123331.0", "Description": "The Module CRMEH (Central Release Management Event Handler) is a submodule of CRM.\n\rThe CRM sub-function \"EventHandler\" collects the diagnostic events that are generated within the VMM sub-functions.and communicates with the diagnostic interface of the HCP1 in order to set or reset event memory entries.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
4	16661870.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Interface description Interface description Raw { "ID": "16661870.0", "ASIL": " ", "Text": "Interface description", "Type": "Folder", "Status": "", "Summary": "Interface description", "Relevant": "no", "column_12": "", "Foreign ID": "1206717.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
5	16661871.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The valid version of the signal and parameter files for the relevant SWRS are: The valid version of the signal and parameter files for the relevant SWRS are: Raw { "ID": "16661871.0", "ASIL": " ", "Text": "The valid version of the signal and parameter files for the relevant SWRS are:", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1206719.0", "Description": "The valid version of the signal and parameter files for the relevant SWRS are:", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
6	16661872.0	Information		no	False	type_not_target, status_filtered, relevance_filtered, empty_target_text	Raw { "ID": "16661872.0", "ASIL": " ", "Text": "No InterWiki reference defined in properties for 'integrity'", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1206721.0", "Description": "No InterWiki reference defined in properties for 'integrity'", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
7	16661873.0	Information		no	False	type_not_target, status_filtered, relevance_filtered, empty_target_text	Raw { "ID": "16661873.0", "ASIL": " ", "Text": "No InterWiki reference defined in properties for 'integrity'", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1206723.0", "Description": "No InterWiki reference defined in properties for 'integrity'", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
8	16661874.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The valid version of the signal and parameter files for test basis to be found in CG, which is to be tested The valid version of the signal and parameter files for test basis to be found in CG, which is to be tested Raw { "ID": "16661874.0", "ASIL": " ", "Text": "The valid version of the signal and parameter files for test basis to be found in CG, which is to be tested", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1376718.0", "Description": "The valid version of the signal and parameter files for test basis to be found in CG, which is to be tested", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
9	16661875.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Presetting/Framework/Definitions Presetting/Framework/Definitions Raw { "ID": "16661875.0", "ASIL": " ", "Text": "Presetting/Framework/Definitions", "Type": "Folder", "Status": "", "Summary": "Presetting/Framework/Definitions", "Relevant": "no", "column_12": "", "Foreign ID": "1123328.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
10	16661876.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Traceability Traceability Raw { "ID": "16661876.0", "ASIL": " ", "Text": "Traceability", "Type": "Folder", "Status": "", "Summary": "Traceability", "Relevant": "no", "column_12": "", "Foreign ID": "1308688.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
11	16661877.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	SWRS to Testcase: The latest revision of the test specification document is valid for the tracability SWRS to Testcase SWRS to Testcase: The latest revision of the test specification document is valid for the tracability SWRS to Testcase Raw { "ID": "16661877.0", "ASIL": " ", "Text": "SWRS to Testcase:\n\rNo InterWiki reference defined in properties for 'integrity' \n\rThe latest revision of the test specification document is valid for the tracability SWRS to Testcase", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1308690.0", "Description": "SWRS to Testcase:\n\rNo InterWiki reference defined in properties for 'integrity' \n\rThe latest revision of the test specification document is valid for the tracability SWRS to Testcase", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
12	16661878.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	SWRS to Codebeamer: CodeBeamer-IDs are mentioned in the SWRS atrribute DOORS IDs. The latest baseline of the specification docu SWRS to Codebeamer: CodeBeamer-IDs are mentioned in the SWRS atrribute DOORS IDs. The latest baseline of the specification document (CodeBeamer) is valid for the traceability SWRS to CodeBeamer. Raw { "ID": "16661878.0", "ASIL": " ", "Text": "SWRS to Codebeamer: \n\rCodeBeamer-IDs are mentioned in the SWRS atrribute DOORS IDs.\n\rThe latest baseline of the specification document (CodeBeamer) is valid for the traceability SWRS to CodeBeamer.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1308692.0", "Description": "SWRS to Codebeamer: \n\rCodeBeamer-IDs are mentioned in the SWRS atrribute DOORS IDs.\n\rThe latest baseline of the specification document (CodeBeamer) is valid for the traceability SWRS to CodeBeamer.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
13	16661879.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Toolchain Toolchain Raw { "ID": "16661879.0", "ASIL": " ", "Text": "Toolchain", "Type": "Folder", "Status": "", "Summary": "Toolchain", "Relevant": "no", "column_12": "", "Foreign ID": "1123373.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
14	16661880.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain. The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain. Raw { "ID": "16661880.0", "ASIL": " QM", "Text": "The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain.", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123375.0", "Description": "The Matlab/Simulink/TargetLink versions have to be used according to the HCP1-Toolchain.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
15	16661881.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used. For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used. Raw { "ID": "16661881.0", "ASIL": " QM", "Text": "For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used.", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123366.0", "Description": "For modeling in Simulink the valid EnProVe catalogue of guidelines has to be used.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
16	16661882.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Tolerances Tolerances Raw { "ID": "16661882.0", "ASIL": " ", "Text": "Tolerances", "Type": "Folder", "Status": "", "Summary": "Tolerances", "Relevant": "no", "column_12": "", "Foreign ID": "1123368.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
17	16661883.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	For the comparison of output signals to the expected reactions or by back-to-back tests (MiL-PiL) following tolerances are accepte For the comparison of output signals to the expected reactions or by back-to-back tests (MiL-PiL) following tolerances are accepted for deviations: Raw { "ID": "16661883.0", "ASIL": " QM", "Text": "For the comparison of output signals to the expected reactions or by back-to-back tests (MiL-PiL) following tolerances are accepted for deviations:", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123369.0", "Description": "For the comparison of output signals to the expected reactions or by back-to-back tests (MiL-PiL) following tolerances are accepted for deviations:", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
18	16661884.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	Bool: No deviation allowed Bool: No deviation allowed Raw { "ID": "16661884.0", "ASIL": " QM", "Text": "\n\r \n\r Bool: No deviation allowed", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123370.0", "Description": "\n\r \n\r Bool: No deviation allowed", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
19	16661885.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	UInt, Int: No deviation allowed UInt, Int: No deviation allowed Raw { "ID": "16661885.0", "ASIL": " QM", "Text": "\n\r \n\r UInt, Int: No deviation allowed", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123371.0", "Description": "\n\r \n\r UInt, Int: No deviation allowed", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
20	16661886.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	Float: 0.1% related to the permissible value range of the signal Float: 0.1% related to the permissible value range of the signal Raw { "ID": "16661886.0", "ASIL": " QM", "Text": "\n\r \n\r Float: 0.1% related to the permissible value range of the signal", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123372.0", "Description": "\n\r \n\r Float: 0.1% related to the permissible value range of the signal", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
21	16661887.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	It must be ensured that an output reaction occurs due to an event at the input within the same calculation step. It must be ensured that an output reaction occurs due to an event at the input within the same calculation step. Raw { "ID": "16661887.0", "ASIL": " QM", "Text": "It must be ensured that an output reaction occurs due to an event at the input within the same calculation step.", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123374.0", "Description": "It must be ensured that an output reaction occurs due to an event at the input within the same calculation step.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
22	16661888.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Bit numbering Bit numbering Raw { "ID": "16661888.0", "ASIL": " ", "Text": "Bit numbering", "Type": "Folder", "Status": "", "Summary": "Bit numbering", "Relevant": "no", "column_12": "", "Foreign ID": "1123376.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
23	16661889.0	Non-functional	Released	no	False	type_not_target, relevance_filtered	The bit numbering takes place as zero-based numbering method. This means, 1 Byte is equal to Bit 0...7. The bit numbering takes place as zero-based numbering method. This means, 1 Byte is equal to Bit 0...7. Raw { "ID": "16661889.0", "ASIL": " QM", "Text": "The bit numbering takes place as zero-based numbering method. \n\rThis means, 1 Byte is equal to Bit 0...7.", "Type": "Non-functional", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123367.0", "Description": "The bit numbering takes place as zero-based numbering method. \n\rThis means, 1 Byte is equal to Bit 0...7.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
24	16661890.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Requirements Requirements Raw { "ID": "16661890.0", "ASIL": " ", "Text": "Requirements", "Type": "Folder", "Status": "", "Summary": "Requirements", "Relevant": "no", "column_12": "", "Foreign ID": "1123330.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
25	16661891.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	For all requirements (except "examples"), an excel table with the name "VMM_CRM_FunctionMatrix.xlsx" is provided (see Modul SWRS_V For all requirements (except "examples"), an excel table with the name "VMM_CRM_FunctionMatrix.xlsx" is provided (see Modul SWRS_VMMP chapter "Central Release Management") It shall be used for the test implementations. Raw { "ID": "16661891.0", "ASIL": " ", "Text": "For all requirements (except \"examples\"), an excel table with the name \"VMM_CRM_FunctionMatrix.xlsx\" is provided (see Modul SWRS_VMMP chapter \"Central Release Management\") \n\rIt shall be used for the test implementations.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1210224.0", "Description": "For all requirements (except \"examples\"), an excel table with the name \"VMM_CRM_FunctionMatrix.xlsx\" is provided (see Modul SWRS_VMMP chapter \"Central Release Management\") \n\rIt shall be used for the test implementations.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
26	16661892.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	For all examples, an excel table with the name "VMM_CRM_FunctionMatrix_Example.xlsx" is provided ), which is used as the data bas For all examples, an excel table with the name "VMM_CRM_FunctionMatrix_Example.xlsx" is provided ), which is used as the data basis. The examples don't refer to the real excel table so the examples remain valid even when the real excel table is changed. The general structure of the example excel table and the real excel table are of course the same. Raw { "ID": "16661892.0", "ASIL": " ", "Text": "For all examples, an excel table with the name \"VMM_CRM_FunctionMatrix_Example.xlsx\" is provided (No InterWiki reference defined in properties for 'integrity' ), which is used as the data basis.\n\rThe examples don't refer to the real excel table so the examples remain valid even when the real excel table is changed.\n\rThe general structure of the example excel table and the real excel table are of course the same.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1123338.0", "Description": "For all examples, an excel table with the name \"VMM_CRM_FunctionMatrix_Example.xlsx\" is provided (No InterWiki reference defined in properties for 'integrity' ), which is used as the data basis.\n\rThe examples don't refer to the real excel table so the examples remain valid even when the real excel table is changed.\n\rThe general structure of the example excel table and the real excel table are of course the same.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
27	16661893.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Definition and naming conventions Definition and naming conventions Raw { "ID": "16661893.0", "ASIL": " ", "Text": "Definition and naming conventions", "Type": "Folder", "Status": "", "Summary": "Definition and naming conventions", "Relevant": "no", "column_12": "", "Foreign ID": "1207076.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
28	16661894.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The following naming conventions will be used: * Sheet refers to one of the sheets of the excel table, i.e. the sheets "dtc", "re The following naming conventions will be used: * Sheet refers to one of the sheets of the excel table, i.e. the sheets "dtc", "reaction" and "statemachine". * Row, column and cell are used with regard to the excel table * Target state and degradation reason are used with regard to the module. These are outputs of the CRM modules. Raw { "ID": "16661894.0", "ASIL": " ", "Text": "The following naming conventions will be used:\n\r* Sheet refers to one of the sheets of the excel table, i.e. the sheets \"dtc\", \"reaction\" and \"statemachine\". \n\r* Row, column and cell are used with regard to the excel table \n\r* Target state and degradation reason are used with regard to the module. These are outputs of the CRM modules.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1207078.0", "Description": "The following naming conventions will be used:\n\r* Sheet refers to one of the sheets of the excel table, i.e. the sheets \"dtc\", \"reaction\" and \"statemachine\". \n\r* Row, column and cell are used with regard to the excel table \n\r* Target state and degradation reason are used with regard to the module. These are outputs of the CRM modules.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
29	16661895.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	Active row A row of a sheet is called active row, if the input of the module with the name given by the column "signal name" has Active row A row of a sheet is called active row, if the input of the module with the name given by the column "signal name" has the value given by the column "signal constant" Example: Let's assume the following inputs to the module: * ASOAF_s_DiagDrvPosn_StEveReq = VMMP_c_DiagEveSigIni * ASOAF_s_EPBActrCtl_StAvl = VMMP_ASOAF_c_EPBActrCtl_StAvlReleaseOnly In this example the only active row of the sheet "dtc" is row 7. The active rows of sheet "reaction" are row 4 and row 11. Raw { "ID": "16661895.0", "ASIL": " ", "Text": "Active row \n\rA row of a sheet is called active row, if the input of the module with the name given by the column \"signal name\" has the value given by the column \"signal constant\"\n\rExample:\n\rLet's assume the following inputs to the module:\n\r* ASOAF_s_DiagDrvPosn_StEveReq = VMMP_c_DiagEveSigIni\n\r* ASOAF_s_EPBActrCtl_StAvl = VMMP_ASOAF_c_EPBActrCtl_StAvlReleaseOnly\n\rIn this example the only active row of the sheet \"dtc\" is row 7.\n\rThe active rows of sheet \"reaction\" are row 4 and row 11.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1207080.0", "Description": "Active row \n\rA row of a sheet is called active row, if the input of the module with the name given by the column \"signal name\" has the value given by the column \"signal constant\"\n\rExample:\n\rLet's assume the following inputs to the module:\n\r* ASOAF_s_DiagDrvPosn_StEveReq = VMMP_c_DiagEveSigIni\n\r* ASOAF_s_EPBActrCtl_StAvl = VMMP_ASOAF_c_EPBActrCtl_StAvlReleaseOnly\n\rIn this example the only active row of the sheet \"dtc\" is row 7.\n\rThe active rows of sheet \"reaction\" are row 4 and row 11.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
30	16661896.0	Folder		no	False	type_not_target, status_filtered, relevance_filtered	Output calculation Output calculation Raw { "ID": "16661896.0", "ASIL": " ", "Text": "Output calculation", "Type": "Folder", "Status": "", "Summary": "Output calculation", "Relevant": "no", "column_12": "", "Foreign ID": "1207082.0", "Description": "", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
31	16661897.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	Empty cell doesn't have any impact on the output. Empty cell doesn't have any impact on the output. Raw { "ID": "16661897.0", "ASIL": " ", "Text": "Empty cell doesn't have any impact on the output.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1232251.0", "Description": "Empty cell doesn't have any impact on the output.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
32	16661898.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	Each column col - starting with column E - of the sheet "dtc" describes two outputs of the module - one DTC flag and one enable fl Each column col - starting with column E - of the sheet "dtc" describes two outputs of the module - one DTC flag and one enable flag. Raw { "ID": "16661898.0", "ASIL": " ", "Text": "Each column col - starting with column E - of the sheet \"dtc\" describes two outputs of the module - one DTC flag and one enable flag.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1207084.0", "Description": "Each column col - starting with column E - of the sheet \"dtc\" describes two outputs of the module - one DTC flag and one enable flag.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
33	16661899.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The name of the output is the name of the column col prefixed by the literal string "VMM_s_" and the name of the outputEnable is t The name of the output is the name of the column col prefixed by the literal string "VMM_s_" and the name of the outputEnable is the name of the column col prefixed by the literal string "VMM_s_Ena". Example: The outputs for the example would be "VMM_s_DTCEPBActrCtlStSigFail", "VMM_s_DTCEPBActrCtlStSigNotVld", "VMM_s_DTCEPBAlyRlsStActrFail", "VMM_s_DTCDrvPosnStSigFail", "VMM_s_DTCDrvPosnStSigNotVld" and the outputEnable would be "VMM_s_EnaDTCEPBActrCtlStSigFail", "VMM_s_EnaDTCEPBActrCtlStSigNotVld", "VMM_s_EnaDTCEPBAlyRlsStActrFail", "VMM_s_EnaDTCDrvPosnStSigFail", "VMM_s_EnaDTCDrvPosnStSigNotVld" on the other side. Raw { "ID": "16661899.0", "ASIL": " ", "Text": "The name of the output is the name of the column col prefixed by the literal string \"VMM_s_\" and the name of the outputEnable is the name of the column col prefixed by the literal string \"VMM_s_Ena\".\n\r \n\rExample:\n\rThe outputs for the example would be \"VMM_s_DTCEPBActrCtlStSigFail\", \"VMM_s_DTCEPBActrCtlStSigNotVld\", \"VMM_s_DTCEPBAlyRlsStActrFail\", \"VMM_s_DTCDrvPosnStSigFail\", \"VMM_s_DTCDrvPosnStSigNotVld\" and the outputEnable would be \"VMM_s_EnaDTCEPBActrCtlStSigFail\", \"VMM_s_EnaDTCEPBActrCtlStSigNotVld\", \"VMM_s_EnaDTCEPBAlyRlsStActrFail\", \"VMM_s_EnaDTCDrvPosnStSigFail\", \"VMM_s_EnaDTCDrvPosnStSigNotVld\" on the other side.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1207086.0", "Description": "The name of the output is the name of the column col prefixed by the literal string \"VMM_s_\" and the name of the outputEnable is the name of the column col prefixed by the literal string \"VMM_s_Ena\".\n\r \n\rExample:\n\rThe outputs for the example would be \"VMM_s_DTCEPBActrCtlStSigFail\", \"VMM_s_DTCEPBActrCtlStSigNotVld\", \"VMM_s_DTCEPBAlyRlsStActrFail\", \"VMM_s_DTCDrvPosnStSigFail\", \"VMM_s_DTCDrvPosnStSigNotVld\" and the outputEnable would be \"VMM_s_EnaDTCEPBActrCtlStSigFail\", \"VMM_s_EnaDTCEPBActrCtlStSigNotVld\", \"VMM_s_EnaDTCEPBAlyRlsStActrFail\", \"VMM_s_EnaDTCDrvPosnStSigFail\", \"VMM_s_EnaDTCDrvPosnStSigNotVld\" on the other side.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
34	24226868.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	The name of the output is the name of the column col prefixed by the literal string "CRMEH_s_" and the name of the outputEnable is The name of the output is the name of the column col prefixed by the literal string "CRMEH_s_" and the name of the outputEnable is the name of the column col prefixed by the literal string "CRMEH_s_Ena". Example: The outputs for the example would be "CRMEH_s_DTCEPBActrCtlStSigFail", "CRMEH_s_DTCEPBActrCtlStSigNotVld", "CRMEH_s_DTCEPBAlyRlsStActrFail", "CRMEH_s_DTCDrvPosnStSigFail", "CRMEH_s_DTCDrvPosnStSigNotVld" and the outputEnable would be "CRMEH_s_EnaDTCEPBActrCtlStSigFail", "CRMEH_s_EnaDTCEPBActrCtlStSigNotVld", "CRMEH_s_EnaDTCEPBAlyRlsStActrFail", "CRMEH_s_EnaDTCDrvPosnStSigFail", "CRMEH_s_EnaDTCDrvPosnStSigNotVld" on the other side. Raw { "ID": "24226868.0", "ASIL": " ", "Text": "The name of the output is the name of the column col prefixed by the literal string \"CRMEH_s_\" and the name of the outputEnable is the name of the column col prefixed by the literal string \"CRMEH_s_Ena\".\n\r \n\rExample:\n\rThe outputs for the example would be \"CRMEH_s_DTCEPBActrCtlStSigFail\", \"CRMEH_s_DTCEPBActrCtlStSigNotVld\", \"CRMEH_s_DTCEPBAlyRlsStActrFail\", \"CRMEH_s_DTCDrvPosnStSigFail\", \"CRMEH_s_DTCDrvPosnStSigNotVld\" and the outputEnable would be \"CRMEH_s_EnaDTCEPBActrCtlStSigFail\", \"CRMEH_s_EnaDTCEPBActrCtlStSigNotVld\", \"CRMEH_s_EnaDTCEPBAlyRlsStActrFail\", \"CRMEH_s_EnaDTCDrvPosnStSigFail\", \"CRMEH_s_EnaDTCDrvPosnStSigNotVld\" on the other side.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "", "Description": "The name of the output is the name of the column col prefixed by the literal string \"CRMEH_s_\" and the name of the outputEnable is the name of the column col prefixed by the literal string \"CRMEH_s_Ena\".\n\r \n\rExample:\n\rThe outputs for the example would be \"CRMEH_s_DTCEPBActrCtlStSigFail\", \"CRMEH_s_DTCEPBActrCtlStSigNotVld\", \"CRMEH_s_DTCEPBAlyRlsStActrFail\", \"CRMEH_s_DTCDrvPosnStSigFail\", \"CRMEH_s_DTCDrvPosnStSigNotVld\" and the outputEnable would be \"CRMEH_s_EnaDTCEPBActrCtlStSigFail\", \"CRMEH_s_EnaDTCEPBActrCtlStSigNotVld\", \"CRMEH_s_EnaDTCEPBAlyRlsStActrFail\", \"CRMEH_s_EnaDTCDrvPosnStSigFail\", \"CRMEH_s_EnaDTCDrvPosnStSigNotVld\" on the other side.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
35	16661900.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	Information for tester: To increase code coverage all elements of the following parameter VMMP_CRMEH_p1_DiagMtrxFlg_XXX shall be Information for tester: To increase code coverage all elements of the following parameter VMMP_CRMEH_p1_DiagMtrxFlg_XXX shall be set to 255, which means that all bits are set. XXX is the "name of the output" - see also 3.4.2 To get the correct output of the test coverage, it shall be assumed that the cells with the value 0 of the column col defined in 3.4.1 - 3.4.2 are changed from 0 to 1. Raw { "ID": "16661900.0", "ASIL": " ", "Text": "Information for tester:\n\rTo increase code coverage all elements of the following parameter VMMP_CRMEH_p1_DiagMtrxFlg_XXX shall be set to 255, which means that all bits are set. XXX is the \"name of the output\" - see also 3.4.2\n\rTo get the correct output of the test coverage, it shall be assumed that the cells with the value 0 of the column col defined in 3.4.1 - 3.4.2 are changed from 0 to 1.", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1424302.0", "Description": "Information for tester:\n\rTo increase code coverage all elements of the following parameter VMMP_CRMEH_p1_DiagMtrxFlg_XXX shall be set to 255, which means that all bits are set. XXX is the \"name of the output\" - see also 3.4.2\n\rTo get the correct output of the test coverage, it shall be assumed that the cells with the value 0 of the column col defined in 3.4.1 - 3.4.2 are changed from 0 to 1.", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
36	16661901.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF[AND(1,2)] 1) All diagnose boundary conditions are fulfilled: Diag_s_BoundaryCdn_VoltRange = 1 & Diag_s_BoundaryCdn_Clmp15Acv IF[AND(1,2)] 1) All diagnose boundary conditions are fulfilled: Diag_s_BoundaryCdn_VoltRange = 1 & Diag_s_BoundaryCdn_Clmp15Acv = 1 & Diag_s_BoundaryCdn_DiagDlyEt = 1 & Diag_s_BoundaryCdn_DiagStartFr = 1 & Diag_s_BoundaryCdn_FrSyncPres = 1 2) Diag_s_DTCFlgRstrt != 1 THEN: EnableDTCFlg is "true" ELSE: EnableDTCFlg is "false" Raw { "ID": "16661901.0", "ASIL": " QM", "Text": "IF[AND(1,2)]\n\r1) All diagnose boundary conditions are fulfilled:\n\rDiag_s_BoundaryCdn_VoltRange = 1 & Diag_s_BoundaryCdn_Clmp15Acv = 1 & Diag_s_BoundaryCdn_DiagDlyEt = 1 & Diag_s_BoundaryCdn_DiagStartFr = 1 & Diag_s_BoundaryCdn_FrSyncPres = 1\n\r2) Diag_s_DTCFlgRstrt != 1\n\rTHEN:\n\rEnableDTCFlg is \"true\"\n\rELSE:\n\rEnableDTCFlg is \"false\"", "Type": "Pre Condition", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1253263.0", "Description": "IF[AND(1,2)]\n\r1) All diagnose boundary conditions are fulfilled:\n\rDiag_s_BoundaryCdn_VoltRange = 1 & Diag_s_BoundaryCdn_Clmp15Acv = 1 & Diag_s_BoundaryCdn_DiagDlyEt = 1 & Diag_s_BoundaryCdn_DiagStartFr = 1 & Diag_s_BoundaryCdn_FrSyncPres = 1\n\r2) Diag_s_DTCFlgRstrt != 1\n\rTHEN:\n\rEnableDTCFlg is \"true\"\n\rELSE:\n\rEnableDTCFlg is \"false\"", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
37	16661902.0	Functional	Released	yes	True		For each column: IF [AND(1,2,3)]: 1) At least one cell of the column col is marked with a "1" and that cell is on an active row For each column: IF [AND(1,2,3)]: 1) At least one cell of the column col is marked with a "1" and that cell is on an active row 2) EnableDTCFlg is "true" 3) VMMP_CRMEH_p_DiagFlg_SwtDeac = 0 THEN: Output is "true" ELSE: Output = 0VMMP_CRMEH_p1_DiagFlgDft Raw { "ID": "16661902.0", "ASIL": " QM", "Text": "For each column:\n\rIF [AND(1,2,3)]:\n\r1) At least one cell of the column col is marked with a \"1\" and that cell is on an active row\n\r2) EnableDTCFlg is \"true\"\n\r3) VMMP_CRMEH_p_DiagFlg_SwtDeac = 0\n\rTHEN:\n\rOutput is \"true\"\n\rELSE:\n\rOutput = 0VMMP_CRMEH_p1_DiagFlgDft", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1207088.0", "Description": "For each column:\n\rIF [AND(1,2,3)]:\n\r1) At least one cell of the column col is marked with a \"1\" and that cell is on an active row\n\r2) EnableDTCFlg is \"true\"\n\r3) VMMP_CRMEH_p_DiagFlg_SwtDeac = 0\n\rTHEN:\n\rOutput is \"true\"\n\rELSE:\n\rOutput = 0*VMMP_CRMEH_p1_DiagFlgDft", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
38	16661903.0	Information		no	False	type_not_target, status_filtered, relevance_filtered	Example: Let's assume the following inputs to the module: * ASOAF_s_EPBAlyRls_StReqResp = VMMP_ASOAF_c_EPBAlyRls_StReqRespFail Example: Let's assume the following inputs to the module: * ASOAF_s_EPBAlyRls_StReqResp = VMMP_ASOAF_c_EPBAlyRls_StReqRespFail * ASOAF_s_DiagDrvPosn_StEveReq = VMMP_c_DiagEveSigNotVld * ASOAF_s_DiagEPBActrCtl_StEveReq = VMMP_c_DiagEveSigFail * So the active rows in this example are row 2, 5 and 8. * Column E (DTCEPBActrCtl_StSigFail) has a "1" in the cells intersecting with rows 2, 8 and 10. Row 2 and 8 are active rows, so the output CRMEH_s_DTCEPBActrCtl_StSigFail for this column would be "true". * Column H (DTCDrvPosn_StSigFail) has a "1" in the cells intersecting with rows 4 and 6. But none of these are active rows, so the output CRMEH_s_DTCDrvPosn_StSigFail for this column would be "false". Raw { "ID": "16661903.0", "ASIL": " ", "Text": "Example:\n\rLet's assume the following inputs to the module:\n\r* ASOAF_s_EPBAlyRls_StReqResp = VMMP_ASOAF_c_EPBAlyRls_StReqRespFail\n\r* ASOAF_s_DiagDrvPosn_StEveReq = VMMP_c_DiagEveSigNotVld\n\r* ASOAF_s_DiagEPBActrCtl_StEveReq = VMMP_c_DiagEveSigFail\n\r* So the active rows in this example are row 2, 5 and 8.\n\r* Column E (DTCEPBActrCtl_StSigFail) has a \"1\" in the cells intersecting with rows 2, 8 and 10. Row 2 and 8 are active rows, so the output CRMEH_s_DTCEPBActrCtl_StSigFail for this column would be \"true\".\n\r* Column H (DTCDrvPosn_StSigFail) has a \"1\" in the cells intersecting with rows 4 and 6. But none of these are active rows, so the output CRMEH_s_DTCDrvPosn_StSigFail for this column would be \"false\".", "Type": "Information", "Status": "", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1207090.0", "Description": "Example:\n\rLet's assume the following inputs to the module:\n\r* ASOAF_s_EPBAlyRls_StReqResp = VMMP_ASOAF_c_EPBAlyRls_StReqRespFail\n\r* ASOAF_s_DiagDrvPosn_StEveReq = VMMP_c_DiagEveSigNotVld\n\r* ASOAF_s_DiagEPBActrCtl_StEveReq = VMMP_c_DiagEveSigFail\n\r* So the active rows in this example are row 2, 5 and 8.\n\r* Column E (DTCEPBActrCtl_StSigFail) has a \"1\" in the cells intersecting with rows 2, 8 and 10. Row 2 and 8 are active rows, so the output CRMEH_s_DTCEPBActrCtl_StSigFail for this column would be \"true\".\n\r* Column H (DTCDrvPosn_StSigFail) has a \"1\" in the cells intersecting with rows 4 and 6. But none of these are active rows, so the output CRMEH_s_DTCDrvPosn_StSigFail for this column would be \"false\".", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
39	27950199.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF [AND(1, 2, 3)] 1) Output changed, i.e. Output(k-1) != Output(k) 2) Diag_s_DTCFlgRstrt = 0 3) All diagnose boundary condition IF [AND(1, 2, 3)] 1) Output changed, i.e. Output(k-1) != Output(k) 2) Diag_s_DTCFlgRstrt = 0 3) All diagnose boundary conditions are fulfilled THEN OutputEnable = "true" Raw { "ID": "27950199.0", "ASIL": " ", "Text": "IF [AND(1, 2, 3)]\n\r1) Output changed, i.e. Output(k-1) != Output(k)\n\r2) Diag_s_DTCFlgRstrt = 0\n\r3) All diagnose boundary conditions are fulfilled\n\rTHEN\n\rOutputEnable = \"true\"", "Type": "Pre Condition", "Status": "Released", "Summary": "Enable Flags - Change Detected", "Relevant": "no", "column_12": "", "Foreign ID": "", "Description": "IF [AND(1, 2, 3)]\n\r1) Output changed, i.e. Output(k-1) != Output(k)\n\r2) Diag_s_DTCFlgRstrt = 0\n\r3) All diagnose boundary conditions are fulfilled\n\rTHEN\n\rOutputEnable = \"true\"", "Vehicle Launch": "", "Vehicle Platform": "" }
40	31779307.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF [AND(1, 2, 3)] 1) Output not changed, i.e. Output(k-1) == Output(k) 2) Diag_s_DTCFlgRstrt = 0 3) All diagnose boundary condi IF [AND(1, 2, 3)] 1) Output not changed, i.e. Output(k-1) == Output(k) 2) Diag_s_DTCFlgRstrt = 0 3) All diagnose boundary conditions are fulfilled THEN OutputEnable = "false" Raw { "ID": "31779307.0", "ASIL": " ", "Text": "IF [AND(1, 2, 3)]\n\r1) Output not changed, i.e. Output(k-1) == Output(k)\n\r2) Diag_s_DTCFlgRstrt = 0\n\r3) All diagnose boundary conditions are fulfilled\n\rTHEN\n\rOutputEnable = \"false\"", "Type": "Pre Condition", "Status": "Released", "Summary": "Enable Flags - No Change Detected", "Relevant": "no", "column_12": "", "Foreign ID": "", "Description": "IF [AND(1, 2, 3)]\n\r1) Output not changed, i.e. Output(k-1) == Output(k)\n\r2) Diag_s_DTCFlgRstrt = 0\n\r3) All diagnose boundary conditions are fulfilled\n\rTHEN\n\rOutputEnable = \"false\"", "Vehicle Launch": "", "Vehicle Platform": "" }
41	27950450.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF [AND(1, 2)] 1) Diag_s_DTCFlgRstrt = 1 2) All diagnose boundary conditions are fulfilled THEN OutputEnable = "true" IF [AND(1, 2)] 1) Diag_s_DTCFlgRstrt = 1 2) All diagnose boundary conditions are fulfilled THEN OutputEnable = "true" Raw { "ID": "27950450.0", "ASIL": " ", "Text": "IF [AND(1, 2)]\n\r1) Diag_s_DTCFlgRstrt = 1\n\r2) All diagnose boundary conditions are fulfilled\n\rTHEN\n\rOutputEnable = \"true\"", "Type": "Pre Condition", "Status": "Released", "Summary": "Enable Flags - Reset Condition", "Relevant": "no", "column_12": "", "Foreign ID": "", "Description": "IF [AND(1, 2)]\n\r1) Diag_s_DTCFlgRstrt = 1\n\r2) All diagnose boundary conditions are fulfilled\n\rTHEN\n\rOutputEnable = \"true\"", "Vehicle Launch": "", "Vehicle Platform": "" }
42	27950511.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF [1] 1) All diagnose boundary conditions are not fulfilled THEN OutputEnable = "false" IF [1] 1) All diagnose boundary conditions are not fulfilled THEN OutputEnable = "false" Raw { "ID": "27950511.0", "ASIL": " ", "Text": "IF [1]\n\r1) All diagnose boundary conditions are not fulfilled\n\rTHEN\n\rOutputEnable = \"false\"", "Type": "Pre Condition", "Status": "Released", "Summary": "Enable Flags - Boundary Conditions Not Fullfilled", "Relevant": "no", "column_12": "", "Foreign ID": "", "Description": "IF [1]\n\r1) All diagnose boundary conditions are not fulfilled\n\rTHEN\n\rOutputEnable = \"false\"", "Vehicle Launch": "", "Vehicle Platform": "" }
43	16661904.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF [XOR(1,2)]: 1) Output(k) 2) Output(k-1) + Output(k) THEN: OutEnable1 = 1 ELSE: THEN: OutEnable1 = 0 8 IF [XOR(1,2)]: 1) Output(k) 2) Output(k-1) + Output(k) THEN: OutEnable1 = 1 ELSE: THEN: OutEnable1 = 0 8 Raw { "ID": "16661904.0", "ASIL": " ", "Text": "IF [XOR(1,2)]:\n\r1) Output(k)\n\r2) Output(k-1) + Output(k)\n\rTHEN:\n\rOutEnable1 = 1\n\rELSE:\n\rTHEN:\n\rOutEnable1 = 0\n\r 8", "Type": "Pre Condition", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1476810.0", "Description": "IF [XOR(1,2)]:\n\r1) Output(k)\n\r2) Output(k-1) + Output(k)\n\rTHEN:\n\rOutEnable1 = 1\n\rELSE:\n\rTHEN:\n\rOutEnable1 = 0\n\r 8", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
44	16661905.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF [OR(1,2)]: 1) OutEnable1 = 1 2) Diag_s_DTCFlgRstrt = 1 THEN: OutEnable2 = 1 ELSE: THEN: OutEnable2 = 0 8 IF [OR(1,2)]: 1) OutEnable1 = 1 2) Diag_s_DTCFlgRstrt = 1 THEN: OutEnable2 = 1 ELSE: THEN: OutEnable2 = 0 8 Raw { "ID": "16661905.0", "ASIL": " ", "Text": "IF [OR(1,2)]:\n\r1) OutEnable1 = 1\n\r2) Diag_s_DTCFlgRstrt = 1\n\rTHEN:\n\rOutEnable2 = 1\n\rELSE:\n\rTHEN:\n\rOutEnable2 = 0\n\r 8", "Type": "Pre Condition", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1476818.0", "Description": "IF [OR(1,2)]:\n\r1) OutEnable1 = 1\n\r2) Diag_s_DTCFlgRstrt = 1\n\rTHEN:\n\rOutEnable2 = 1\n\rELSE:\n\rTHEN:\n\rOutEnable2 = 0\n\r 8", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
45	16661906.0	Pre Condition	Released	no	False	type_not_target, relevance_filtered	IF [AND(1,2)]: 1) OutEnable2 = 1 2) diagnose boundary conditions are not fullfilled THEN: OutEnable3 = 1 ELSE: THEN: OutEna IF [AND(1,2)]: 1) OutEnable2 = 1 2) diagnose boundary conditions are not fullfilled THEN: OutEnable3 = 1 ELSE: THEN: OutEnable3 = 0 8 Raw { "ID": "16661906.0", "ASIL": " ", "Text": "IF [AND(1,2)]:\n\r1) OutEnable2 = 1\n\r2) diagnose boundary conditions are not fullfilled\n\rTHEN:\n\rOutEnable3 = 1\n\rELSE:\n\rTHEN:\n\rOutEnable3 = 0\n\r 8", "Type": "Pre Condition", "Status": "Released", "Summary": "", "Relevant": "no", "column_12": "", "Foreign ID": "1476825.0", "Description": "IF [AND(1,2)]:\n\r1) OutEnable2 = 1\n\r2) diagnose boundary conditions are not fullfilled\n\rTHEN:\n\rOutEnable3 = 1\n\rELSE:\n\rTHEN:\n\rOutEnable3 = 0\n\r 8", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }
46	16661907.0	Functional	Released	yes	True		IF [AND(OR(1, 2), 3)]: 1) OutEnable3(k-1) = 1 2) OutEnable2 = 1 3) All diagnose boundary conditions are fulfilled THEN: Outpu IF [AND(OR(1, 2), 3)]: 1) OutEnable3(k-1) = 1 2) OutEnable2 = 1 3) All diagnose boundary conditions are fulfilled THEN: OutputEnable = "true" ELSE OutputEnable = 0VMMP_CRMEH_p_SwDiagFlg Raw { "ID": "16661907.0", "ASIL": " QM", "Text": "IF [AND(OR(1, 2), 3)]:\n\r1) OutEnable3(k-1) = 1\n\r2) OutEnable2 = 1\n\r3) All diagnose boundary conditions are fulfilled\n\rTHEN:\n\rOutputEnable = \"true\"\n\rELSE\n\rOutputEnable = 0VMMP_CRMEH_p_SwDiagFlg", "Type": "Functional", "Status": "Released", "Summary": "", "Relevant": "yes", "column_12": "", "Foreign ID": "1291816.0", "Description": "IF [AND(OR(1, 2), 3)]:\n\r1) OutEnable3(k-1) = 1\n\r2) OutEnable2 = 1\n\r3) All diagnose boundary conditions are fulfilled\n\rTHEN:\n\rOutputEnable = \"true\"\n\rELSE\n\rOutputEnable = 0*VMMP_CRMEH_p_SwDiagFlg", "Vehicle Launch": "", "Vehicle Platform": "E³ 1.2" }

Source files

Mapping profiles

Import history

VME-PROD-VehicleMotionManagement - VMMP_CRM_CRMEH.xlsx · source records

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw

Raw